{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30401P16F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30401P16F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30401P16F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30401P16F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with holding brake, 170 W continuous power, 0.4 N.m holding torque, 99.4 mm length, 40 mm flange, absolute single-turn SinCos Hiperface encoder, IP65.","salesMarkdown":"## Frame size and mounting constraints The SH30401P16F2000 uses a 40 mm flange (IEC standard) with four 4.5 mm mounting holes on a 30 mm centring collar, 2.5 mm deep. Overall length is 99.4 mm — this fits tight-axis envelopes where the motor projects into the machine frame. Shaft is 8 mm diameter by 25 mm long with a parallel key (3 mm key width). The rotatable right-angled connector lets the cable exit orient in 90° increments, useful when the motor sits against a panel wall or beam. ## Speed-torque envelope across supply voltages Nominal speed is 4000 rpm on single-phase 115 V or 230 V input, and 9000 rpm on three-phase 400 V or 480 V. The nominal torque sits at 0.176 N.m on single-phase supplies and rises slightly to 0.184 N.m on three-phase — the torque constant is 0.19 N.m/A at 120 °C hot copper. Peak stall torque reaches 0.75 N.m at 480 V three-phase, giving a 4× overload margin over the nominal torque for acceleration and short-duration moves. Continuous stall torque is 0.21 N.m at 1.12 A continuous stall current. ## Brake sizing and vertical-axis holding The brake is engaged when the motor is unpowered; the drive must release it before motion. No separate brake rectifier is needed — the motor cable carries the brake voltage from the drive. ## Feedback and environmental sealing Encoder is an absolute single-turn SinCos Hiperface — the drive reads absolute position within one revolution at power-up, no homing sequence needed. The SinCos analog track gives fine interpolation for velocity ripple below 1 % at low speed. IP rating is IP54 at the shaft bushing without the shaft seal ring, and IP65 at the motor body and with the shaft seal fitted. Natural convection cooling — no fan, so the motor stays sealed for washdown environments.","metaTitle":"Schneider Electric SH30401P16F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30401P16F2000 SH3 servo motor with holding brake, 170 W continuous power, 0.4 N.m holding torque, absolute SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Length":"99.4 mm","Inertia":"0.017 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.04 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.176 N.m at 115 V single phase 0.176 N.m at 230 V single phase 0.184 N.m at 400 V three phase 0.184 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.19 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"170 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"13.6 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"0.75 N.m at 480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"17.2 Ohm","Maximum current Irms":"4.5 A","Nominal output power":"77 W at 115 V single phase 77 W at 230 V single phase 166 W at 400 V three phase 166 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"4.5 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.21 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.12 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c85c969c1545dd10677f856d748affc5.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30401P16F2000/sh3-servomotor-40mm-1-stack-keyed-shaft-sincos-singleturn-16-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30401P16F2000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30401P16F2000 in the SH3 family?","answer":"The sizing reference SH30402P is the next-larger frame in the same SH3 series. It shares the same 40 mm flange and connector style but delivers higher continuous torque — use it as an uprate path if the application outgrows the 0.184 N.m nominal torque."},{"question":"What compliance documentation does Schneider provide for SH30401P16F2000?","answer":"The motor carries IP ratings conforming to IEC 60034-5. Standard Schneider documentation includes the CE declaration of conformity and the product data sheet with electrical parameters. RoHS and REACH compliance status is confirmed per Schneider's material declaration process."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30401P16F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30401P16F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}