{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30401P17A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30401P17A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30401P17A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30401P17A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30401P17A2000, 170 W continuous power, 9000 rpm max mechanical speed, absolute multiturn SinCos Hiperface encoder, 40 mm flange, IP54/IP65.","salesMarkdown":"## Speed-torque envelope depends on supply voltage The SH30401P17A2000: This SH3-frame servo motor delivers 0.176 N.m nominal torque at 115 V or 230 V single-phase input, and 0.184 N.m at 400 V or 480 V three-phase — a small torque bump when running on three-phase mains. The nominal speed jumps from 4000 rpm on single-phase to 9000 rpm on three-phase, with the same 9000 rpm ceiling as the maximum mechanical speed. Continuous stall torque is 0.21 N.m across the three-phase voltage range, with a peak stall torque of 0.75 N.m at 480 V three-phase — roughly 3.6× the continuous rating for short-duration moves. ## Encoder and feedback — drive matching The absolute multiturn SinCos Hiperface encoder with 16 periods per revolution gives position feedback without a home cycle on power-up — the drive knows the rotor angle immediately. Hiperface is a standard single-cable protocol; confirm the drive's feedback card supports this interface before wiring. ## Physical fit — flange, shaft, and sealing 40 mm international standard flange with a 30 mm centring collar and 2.5 mm collar depth — bolts through four 4.5 mm holes on the mounting face. 8 mm shaft with 25 mm length, parallel key 3 mm wide — standard for this frame size. IP54 at the shaft bushing without the seal ring; IP65 with the seal ring fitted and the rotatable right-angled connector mated — the connector O-ring is the wet-end barrier. ## Electrical parameters and thermal limits Stator resistance 17.2 Ω and inductance 7.3 mH — these set the electrical time constant at about 0.42 ms, fast enough for the 9000 rpm speed loop. Continuous stall current 1.12 A; maximum RMS current 4.5 A for 3 seconds peak — the drive's current loop must be tuned to respect the 4.5 A ceiling. Torque constant 0.19 N.m/A at 120 °C copper temperature; back EMF constant 13.6 V/krpm at 20 °C — use the hot torque constant for sizing at continuous duty.","metaTitle":"Schneider Electric SH30401P17A2000 Servo Motor, 170 W","metaDescription":"Schneider Electric SH30401P17A2000 SH3 servo motor, 170 W continuous power, 9000 rpm max, absolute multiturn encoder. Current production — quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30401P17A2000","Length":"73.4 mm","Inertia":"0.0 kg.cm² of brake 0.023 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 1 stack, keyed Shaft, SinCos Multiturn 16, no Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0232 kg.cm²","Nominal torque":"0.176 N.m at 115 V single phase 0.176 N.m at 230 V single phase 0.184 N.m at 400 V three phase 0.184 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.19 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"170 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"13.6 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"0.75 N.m at 480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"17.2 Ohm","Maximum current Irms":"4.5 A","Nominal output power":"77 W at 115 V single phase 77 W at 230 V single phase 166 W at 400 V three phase 166 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"4.5 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.21 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.12 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$825.07","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c5c1afca658a290c4fb1539b801c955c.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30401P17A2000/sh3-servomotor-40mm-1-stack-keyed-shaft-sincos-multiturn-16-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the continuous power rating of SH30401P17A2000?","answer":"Continuous power is 170 W, with nominal output power varying by supply: 77 W at 115/230 V single-phase, 166 W at 400/480 V three-phase."},{"question":"What encoder type does this motor use?","answer":"Absolute multiturn SinCos Hiperface encoder with 16 periods per revolution — position is retained on power cycle without a homing move."},{"question":"What is the shaft size and key specification?","answer":"8 mm shaft diameter, 25 mm shaft length, with a 3 mm parallel key."},{"question":"How can I order SH30401P17A2000 or check availability?","answer":"Submit an RFQ for current availability and pricing — lead time and volume breaks confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30401P17A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30401P17A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}