{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30401P17F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30401P17F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30401P17F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30401P17F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30401P17F2100 SH3 servo motor with brake, 170 W continuous power, 0.4 N.m holding torque, IP65, 40 mm flange, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Motor sizing and supply-voltage split The SH30401P17F2100 delivers 0.176 N.m nominal torque on single-phase 115 V or 230 V supply, and 0.184 N.m on three-phase 400 V or 480 V — the torque constant is 0.19 N.m/A at 120 °C copper hot. Nominal speed jumps from 4000 rpm on single-phase to 9000 rpm on three-phase, so the BOM must match the drive voltage to the line supply before committing the kit. Continuous power is 170 W, with nominal output power rated 77 W on single-phase and 166 W on three-phase. Peak stall torque reaches 0.75 N.m at 480 V three-phase, giving a short-term overload margin for acceleration peaks. ## Encoder and brake — what ships in the carton The motor carries an absolute multiturn SinCos Hiperface encoder — no homing routine after a power cycle, which saves commissioning time on multi-axis lines. Holding brake torque is 0.4 N.m, enough to hold a light vertical load on power-off without a separate brake resistor. ## IP65 and flange dimensions IP65 rating on both the motor body and shaft bushing per IEC 60034-5 — the unit withstands washdown in food, beverage, or packaging environments. Cooling is natural convection; no external fan or air supply needed. The 40 mm international standard flange has four mounting holes at 4.5 mm diameter, a centring collar 30 mm diameter by 2.5 mm deep, and an 8 mm shaft with a 25 mm parallel keyed length (key width 3 mm). Overall motor length is 99.4 mm.","metaTitle":"Schneider Electric SH30401P17F2100 Servo Motor with Brake","metaDescription":"SH30401P17F2100 Schneider Electric SH3 servo motor, 170 W continuous power, 0.4 N.m holding brake, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30401P17F2100","Length":"99.4 mm","Inertia":"0.017 kg.cm² of brake 0.023 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 1 stack, keyed Shaft, SinCos Multiturn 16, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.04 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.176 N.m at 115 V single phase 0.176 N.m at 230 V single phase 0.184 N.m at 400 V three phase 0.184 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.19 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"170 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"13.6 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"0.75 N.m at 480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"17.2 Ohm","Maximum current Irms":"4.5 A","Nominal output power":"77 W at 115 V single phase 77 W at 230 V single phase 166 W at 400 V three phase 166 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"4.5 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.21 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.12 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,360.26","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e13f3ef7971df9c2aceae13ef4514890.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30401P17F2100/sh3-servomotor-40mm-1-stack-keyed-shaft-sincos-multiturn-16-brake-angular-ip65-65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30401P17F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30401P17F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}