{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P06F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P06F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30402P06F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P06F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with holding brake, 290 W continuous power, 0.4 N.m holding torque, absolute single-turn SinCos Hiperface encoder, 40 mm flange, smooth shaft.","salesMarkdown":"The SH30402P06F2000: This SH3-frame servo delivers 290 W continuous power and 0.4 N.m holding torque from the integrated brake. The holding brake is rated to keep the load stationary when power is removed — essential for vertical-axis applications where a dropped load is a safety or scrap event. Nominal torque ranges from 0.292 N.m on single-phase supply to 0.31 N.m on three-phase 400/480 V. Peak stall torque hits 1.5 N.m at 480 V three-phase, giving headroom for acceleration transients without oversizing the motor frame. The absolute single-turn SinCos Hiperface encoder provides position feedback on power-up without a homing cycle — a time-saver on multi-axis machines where lost position after a power cycle means re-referencing every axis. ## Speed range and cooling — natural convection limits Nominal speed is 4000 rpm on single-phase 115/230 V, and 9000 rpm on three-phase 400/480 V. Maximum mechanical speed is 9000 rpm — the winding and bearing set are built for that ceiling. Cooling is natural convection — no fan. That means the continuous torque rating assumes free airflow around the motor body. In a crowded cabinet or enclosed mounting, derate the continuous stall torque (0.39 N.m at 115...480 V three-phase,) or add forced air. IP54 on the shaft bushing without seal ring; IP65 on the motor body and with the shaft seal ring fitted. The IP65 rating holds up to washdown environments — food processing or packaging lines — provided the rotatable right-angled connector is properly mated. ## Mounting and mechanical interface 40 mm international standard flange with four 4.5 mm mounting holes on a 30 mm centring collar at 2.5 mm depth. The 8 mm smooth shaft extends 25 mm. Overall length is 119.4 mm.","metaTitle":"Schneider Electric SH30402P06F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30402P06F2000 SH3 servo motor with holding brake, 290 W continuous power, 0.4 N.m holding torque, absolute single-turn SinCos Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P06F2000","Length":"119.4 mm","Inertia":"0.017 kg.cm² of brake 0.042 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 40mm, 2 stacks, smooth Shaft, SinCos Singleturn 16, Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,086.48","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6c378654e72df23b01b91f47b59c5cec.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30402P06F2000/sh3-servomotor-40mm-2-stacks-smooth-shaft-sincos-singleturn-16-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What encoder type does SH30402P06F2000 use?","answer":"Absolute single-turn SinCos Hiperface encoder with 16 periods per revolution speed feedback resolution. No battery backup needed for position at power-up."},{"question":"What is the holding torque of the brake on SH30402P06F2000?","answer":"0.4 N.m holding torque. The brake is rated to hold the load stationary when power is removed — sized for vertical-axis or gravity-loaded applications within the motor's continuous torque range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P06F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P06F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}