{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P06F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P06F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30402P06F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P06F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30402P06F2100, 40 mm flange, 0.4 N.m holding torque, IP65, absolute single-turn SinCos Hiperface encoder, 119.4 mm length.","salesMarkdown":"## Speed range and voltage — the real constraint The SH30402P06F2100: This SH3 frame servo motor delivers 4000 rpm on single-phase 115 V or 230 V supply, and jumps to 9000 rpm when fed three-phase 400 V or 480 V — the speed ceiling is set by the input voltage configuration, not the motor itself. Nominal torque holds at 0.292 N.m for single-phase operation and rises slightly to 0.31 N.m on three-phase, so the torque density stays consistent across the voltage split — useful if you're migrating a machine from single-phase to three-phase without swapping the motor. ## Brake and encoder — what drops into the old footprint The holding brake delivers 0.4 N.m static torque — enough to hold a vertical axis at standstill on a small pick-and-place or labelling station, but not a load that needs dynamic braking. Encoder is an absolute single-turn SinCos Hiperface type — no homing sequence on power-up, which saves a cycle-time hit on machines that cycle power between batches. Motor flange is 40 mm with a 30 mm centring collar and 4.5 mm mounting holes — standard 40 mm frame interface, so it drops into most existing servo mounts without re-drilling the bracket. ## IP65 and natural convection — no fan, no filter IP65 rating on both the motor body and the shaft bushing means it handles washdown and dust without a separate enclosure — the shaft seal is part of the motor, not an add-on. Cooling is natural convection — no fan to clog or fail, but the continuous stall torque of 0.39 N.m (three-phase) and 1.5 A stall current define the thermal limit under sustained load.","metaTitle":"Schneider Electric SH30402P06F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30402P06F2100 servo motor with holding brake, 0.4 N.m holding torque, IP65, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P06F2100","Length":"119.4 mm","Inertia":"0.017 kg.cm² of brake 0.042 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 40mm, 2 stacks, smooth Shaft, SinCos Singleturn 16, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e9d67cf66c91b2c9e3a6f48d41b21fcf.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30402P06F2100/sh3-servomotor-40mm-2-stacks-smooth-shaft-sincos-singleturn-16-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30402P06F2100?","answer":"The holding brake delivers 0.4 N.m static torque — sufficient for vertical-axis holding on light-duty servo applications."},{"question":"What encoder type does SH30402P06F2100 use?","answer":"Absolute single-turn SinCos Hiperface encoder — no homing required on power-up, which simplifies commissioning and reduces cycle time on machines that cycle power."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P06F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P06F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}