{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P07F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P07F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30402P07F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P07F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30402P07F2000, 290 W continuous power, 0.4 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65, 40 mm flange, smooth shaft.","salesMarkdown":"## Motor ratings that govern the application envelope The SH30402P07F2000 is a 290 W continuous power servo motor from the SH3 family, delivering nominal torque that depends on the supply configuration: 0.292 N.m on single-phase 115 V or 230 V, and 0.31 N.m on three-phase 400 V or 480 V. Nominal speed is 4000 rpm on single-phase supplies and 9000 rpm on three-phase — the maximum mechanical speed is capped at 9000 rpm, so the three-phase line drives the motor to its full speed envelope. Peak stall torque reaches 1.5 N.m at 480 V three-phase, with a continuous stall torque of 0.39 N.m across the 115...480 V three-phase range — the motor can deliver short-duration overloads roughly 4.8× the continuous stall figure before the thermal limit is hit. The absolute multiturn SinCos Hiperface encoder provides 16 periods of speed feedback resolution — this is a single-cable feedback protocol that carries position and temperature data over the motor power cable, simplifying the cable chain on the axis. A holding brake is integrated, rated at 0.4 N.m holding torque — sufficient to hold the vertical axis load at standstill without powering the motor windings, which matters for Z-axis applications in pick-and-place or gantry systems. ## Mounting, cooling, and environmental fit The motor mounts to an international standard 40 mm flange with four 4.5 mm diameter holes and a 30 mm centring collar that is 2.5 mm deep — the flange pattern matches the common 40 mm frame size used across the SH3 family. Cooling is by natural convection — no external fan or forced air is required, which simplifies installation in confined cabinets but means the continuous torque rating assumes free airflow around the motor body. IP protection is rated IP54 at the shaft bushing without the shaft seal ring, and IP65 on the motor body and shaft bushing when fitted with the seal ring — the IP65 configuration suits washdown environments in food processing or packaging lines where hose-down cleaning is routine. ## Electrical parameters for drive matching Stator resistance is 11.6 Ohm and stator inductance is 6.4 mH — these values define the electrical time constant and the current-loop tuning parameters the servo drive must accommodate. The torque constant is 0.26 N.m/A at 120 °C copper temperature, and the back EMF constant is 18 V/krpm at 20 °C — the back EMF limits the maximum achievable speed at a given DC bus voltage, particularly on the single-phase supply where the nominal speed is half the three-phase figure. Maximum continuous current (Irms) is 7.2 A, with a 3-second peak of the same value — the peak-to-continuous ratio is 1:1, meaning the motor's thermal limit rather than the magnetic saturation sets the overload ceiling. No stock-holding claim is made — each order is quoted individually.","metaTitle":"Schneider Electric SH30402P07F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30402P07F2000 servo motor with holding brake, 290 W continuous power, 4000-9000 rpm, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P07F2000","Length":"119.4 mm","Inertia":"0.017 kg.cm² of brake 0.042 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 40mm, 2 stacks, smooth Shaft, SinCos Multiturn 16, Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,393.74","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/718f5b58bcf1b02f1905f3f83f5bc55e.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30402P07F2000/sh3-servomotor-40mm-2-stacks-smooth-shaft-sincos-multiturn-16-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the SH30402P07F2000's nominal torque at different supply voltages?","answer":"Nominal torque is 0.292 N.m on single-phase 115 V or 230 V supplies, and 0.31 N.m on three-phase 400 V or 480 V supplies. The continuous stall torque is 0.39 N.m across the three-phase range."},{"question":"What encoder type does the SH30402P07F2000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder with 16 periods of speed feedback resolution. This is a single-cable feedback protocol that combines position and temperature data on the motor power cable."},{"question":"What is the holding brake torque on the SH30402P07F2000?","answer":"The integrated holding brake provides 0.4 N.m of holding torque, sufficient to hold vertical loads at standstill without motor winding current."},{"question":"What IP rating does the SH30402P07F2000 have?","answer":"The motor body and shaft bushing are rated IP65 when the shaft seal ring is fitted, and IP54 at the shaft bushing without the seal ring. This conforms to IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P07F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P07F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}