{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P0DF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P0DF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30402P0DF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P0DF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30402P0DF4000 SH3 servo motor with brake, 0.31 N.m nominal torque, 9000 rpm at 400 V three-phase, 40 mm flange, IP65, Hiperface DSL absolute multiturn encoder.","salesMarkdown":"## 290 W continuous, 1.5 N.m peak — sizing the drive The SH30402P0DF4000 from Schneider Electric is a current-production servo motor with integrated holding brake in the SH3 series, sized at 40 mm flange and built for panel-side mounting through the standard international flange footprint. Continuous mechanical output reaches 290 W, with nominal torque stepping from 0.37 N.m on 230 V single-phase down to 0.31 N.m on 400 V or 480 V three-phase — the figure a sizing engineer should pin to the BOM, not the headline stall. Peak stall torque is 1.5 N.m on 480 V three-phase, so the drive must reserve headroom above the 0.31 N.m nominal point — a 5× burst factor that maps cleanly onto high-acceleration moves on a small parts-handling axis. Maximum mechanical speed is 9000 rpm at 400 V and 480 V three-phase, but only 4000 rpm at 230 V single-phase; running this motor off a single-phase 230 V supply costs more than half the speed envelope and is the difference between a feasible machine cycle and a stalled one. ## Hiperface DSL single-cable link, 32768×4096 turns Feedback is an absolute multiturn Hiperface DSL encoder at 32768 points/turn × 4096 turns resolution, terminated through a quicklock rotatable right-angled connector — a single-cable hybrid power-and-feedback link that cuts the cable count to the drive and lets the machine builder route through tight cable chains without a second signal cable. Shaft interface is a smooth 8 mm diameter × 25 mm long stub with an IP65 motor body and IP54 shaft bushing without shaft seal ring. IP65 on the body means the motor housing tolerates jet washdown and dust ingress on a food-grade or machine-tool envelope — the shaft entry drops to IP54 because there is no shaft seal ring fitted, so liquid creeping along the shaft is not sealed against. ## Brake, current, and electrical constants Electrical constants follow the SH3 compact class: torque constant 0.26 N.m/A at 120 °C, back-EMF constant 18 V/krpm at 20 °C, stator resistance 11.6 Ohm and inductance 12.8 mH. The 5-pole stator and natural-convection cooling place this firmly in the low-inertia small-format bracket — flange temperature limits reach the 130 °C copper-hot class, so adjacent cabling must be rated above the usual 80 °C jacket for continuous-duty panel builds.","metaTitle":"SH30402P0DF4000 Schneider SH3 Servo Motor, 0.31 N.m, IP65","metaDescription":"Schneider SH30402P0DF4000 SH3 servo motor with brake, 0.31 N.m nominal at 400 V, 9000 rpm, Hiperface DSL encoder, IP65 body. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P0DF4000","Length":"130.9 mm","Shaft end":"Smooth shaft","description":"SH3 servomotor, 40mm, 2 stacks, smooth Shaft, Multiturn DSL 15bit, Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.37 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Product weight":"0.75 kg","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"12.8 mH","Stator resistance":"11.6 Ohm","Brake pull-in power":"5.8 W","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 230 V single phase 292 W at 400 V three phase 292 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"5","Temperature copper hot":"130 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"10000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"32768 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/687ae0ccf27333d8fcc05761b113421b.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30402P0DF4000/sh3-servomotor-40mm-2-stacks-smooth-shaft-multiturn-dsl-15bit-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What is the SH30402P0DF4000's nominal torque and at which supply?","answer":"The SH30402P0DF4000 is rated at 0.37 N.m nominal on 230 V single-phase and 0.31 N.m on 400 V or 480 V three-phase, with continuous mechanical output of 290 W and peak stall torque of 1.5 N.m at 480 V three-phase."},{"question":"What feedback encoder does the SH30402P0DF4000 carry?","answer":"It carries an absolute multiturn Hiperface DSL encoder at 32768 points/turn × 4096 turns resolution, terminated through a quicklock rotatable right-angled single-cable connector — so power and feedback run on one hybrid lead."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P0DF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P0DF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}