{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P16A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P16A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30402P16A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P16A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30402P16A2000, 290 W continuous power, 0.31 N.m nominal torque at 400 V three-phase, 4000-9000 rpm speed range, absolute single-turn SinCos Hiperface encoder, IP65, 40 mm flange, 8 mm shaft with parallel key.","salesMarkdown":"## Speed and torque depend on your supply voltage The SH30402P16A2000: This SH3 motor delivers 0.292 N.m nominal torque and 152 W output power when fed from 115 V or 230 V single-phase supply. Connected to 400 V or 480 V three-phase, torque rises to 0.31 N.m and power to 275-289 W. The nominal speed jumps from 4000 rpm on single-phase to 9000 rpm on three-phase — the supply configuration directly sets the performance envelope. Peak stall torque reaches 1.5 N.m at 480 V three-phase, giving short-duration acceleration headroom for positioning moves. Continuous stall torque is 0.39 N.m across the 115-480 V three-phase range, with a continuous stall current of 1.5 A. ## Encoder and feedback — absolute position without homing The absolute single-turn SinCos Hiperface encoder (16 periods resolution) provides position feedback on power-up without a homing sequence — the drive knows the rotor angle immediately. This eliminates the reference-run cycle typical of incremental encoders, reducing commissioning time on multi-axis machines. The back EMF constant is 18 V/krpm at 20 °C, and the torque constant is 0.26 N.m/A at 120 °C copper temperature. Stator resistance measures 11.6 Ohm with 6.4 mH inductance — these values inform the drive's current-loop tuning parameters. ## Mounting and environmental sealing The motor mounts on a 40 mm international standard flange with four 4.5 mm mounting holes and a 30 mm centring collar (2.5 mm depth). The 8 mm shaft extends 25 mm with a parallel key (3 mm key width) — a standard small-frame servo interface. IP rating depends on the shaft seal: IP54 without the shaft seal ring, IP65 with it fitted. The motor body itself is rated IP65 per IEC 60034-5. The rotatable right-angled connector lets the cable exit point be adjusted during installation to suit tight cable-tray routing. The sizing reference SH30402P anchors the frame size and winding family; any parametric substitute would require matching the 40 mm flange, 8 mm shaft, Hiperface encoder interface, and the voltage-dependent torque curve.","metaTitle":"Schneider Electric SH30402P16A2000 Servo Motor, 290 W","metaDescription":"Schneider Electric SH30402P16A2000 SH3 servo motor, 290 W continuous power, 0.31 N.m torque at 400 V three-phase, absolute Hiperface encoder, IP65, active","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P16A2000","Length":"93.4 mm","Inertia":"0.0 kg.cm² of brake 0.042 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, SinCos Singleturn 16, no Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0419 kg.cm²","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$792.29","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e71f55e0485dd8b25dde6d7eac029948.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30402P16A2000/sh3-servomotor-40mm-2-stacks-keyed-shaft-sincos-singleturn-16-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is SH30402P16A2000's length and inertia?","answer":"The motor body length is 93.4 mm. Rotor inertia is 0.0419 kg.cm², with the brake inertia listed as 0.0 kg.cm² (this variant ships without a holding brake). Total inertia for the motor alone is 0.0419 kg.cm²."},{"question":"What compliance documentation does Schneider Electric provide for SH30402P16A2000?","answer":"The motor carries IP ratings per IEC 60034-5. Standard compliance documentation includes the CE declaration of conformity and the manufacturer's test certificate. RoHS and REACH declarations are available from Schneider Electric upon request through the supply channel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P16A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P16A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}