{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P16F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P16F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30402P16F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P16F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30402P16F2100, 290 W continuous power, 0.31 N.m nominal torque at 400/480 V three-phase, 9000 rpm max speed, IP65, absolute single-turn SinCos Hiperface encoder, 40 mm flange.","salesMarkdown":"## Motor ratings and what they mean for your axis The SH30402P16F2100 delivers 290 W continuous power with a nominal torque of 0.31 N.m when fed from a 400 V or 480 V three-phase supply. That torque is available up to the rated speed of 9000 rpm — the full power band spans from stall to that ceiling, so the motor can run a direct-drive spindle or a low-ratio belt without needing a gearbox to reach line speed. Peak stall torque hits 1.5 N.m at 480 V three-phase — about 5× the continuous rating. That burst is what accelerates a high-inertia load through the first few revolutions or pushes through a momentary jam. The 7.2 A peak current and 7.2 A maximum Irms tell the drive what to budget for the current loop; the 6.4 mH stator inductance and 11.6 Ohm stator resistance set the electrical time constant the servo drive's tuning parameters need to handle. ## Encoder feedback and mechanical fit The absolute single-turn SinCos Hiperface encoder reports position on power-up — no homing sequence, no battery-backed multi-turn count. That saves a reference run after every power cycle, which matters on machines where the axis must hold its last commanded position through a power loss. The shaft is 8 mm diameter with a 25 mm length and a 3 mm parallel key. The 40 mm flange with a 30 mm centring collar and 2.5 mm collar depth bolts to standard IEC 40-frame gearboxes and mounting brackets. Four 4.5 mm mounting holes on the flange face — M4 or #8 bolts fit. The rotatable right-angled connector lets the cable exit point be oriented in 90° increments after the motor is bolted down — useful when the cable tray approach angle changes or when the motor sits in a corner of the cabinet with limited clearance. ## Environmental sealing and cooling The seal at the shaft exit is the vulnerable point; the IP65 bushing rating here covers it, so coolant mist won't wick into the bearing housing. Cooling is natural convection — no fan, no compressed air. The 290 W continuous rating assumes free air movement around the 119.4 mm body. If the motor is inside a cramped enclosure or near a heat source, the available torque derates; the thermal time constant is set by the copper winding temperature limit of 120 °C. ## Sourcing and lifecycle status No official successor or cross-reference is listed — the SH30402P16F2100 is the current variant for the 40 mm flange, 290 W, brake-equipped configuration. The sizing reference SH30402P groups the frame and winding family; confirm the encoder type and brake option match the BOM line before ordering.","metaTitle":"Schneider Electric SH30402P16F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30402P16F2100 SH3 servo motor with holding brake, 290 W continuous power, 9000 rpm max mechanical speed, IP65, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P16F2100","Length":"119.4 mm","Inertia":"0.017 kg.cm² of brake 0.042 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, SinCos Singleturn 16, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,254.42","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/354a83360a17b722b4284d7467fb8a99.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30402P16F2100/sh3-servomotor-40mm-2-stacks-keyed-shaft-sincos-singleturn-16-brake-angular-ip65-65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P16F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P16F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}