{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P17A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P17A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30402P17A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P17A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30402P17A2100, 290 W continuous power, 0.31 N.m at 480 V three-phase, 9000 rpm, IP65, absolute multiturn SinCos Hiperface encoder, 40 mm flange.","salesMarkdown":"## 290 W, 40 mm flange — what fits where The SH30402P17A2100 is a 290 W continuous power servo motor from the SH3 family, built on a 40 mm international standard flange. It delivers 0.31 N.m nominal torque at 480 V three-phase and spins to 9000 rpm, making it a fit for compact positioning axes in pick-and-place, labelling, or small conveyor drives. The motor carries an absolute multiturn SinCos Hiperface encoder with 16 periods of speed feedback resolution — no homing cycle needed on power-up, which matters for multi-axis gantries where lost position means a re-teach. IP65 rating on both the motor body and the shaft bushing means it handles washdown environments on food or packaging lines without a secondary cover. ## Connector, cooling, and shaft details The electrical connection is a rotatable right-angled connector — useful when cable exit direction has to clear neighbouring hardware in a tight cabinet. Cooling is natural convection, so no forced-air clearance or fan maintenance; the motor relies on its own surface area and the machine's ambient airflow. Shaft is 8 mm diameter with a 25 mm length and a parallel key (3 mm key width). The centring collar is 30 mm diameter with a 2.5 mm depth — standard for 40 mm flange motors, so it drops into existing mounts without adapter plates. ## Electrical parameters — torque, current, and thermal limits Continuous stall torque is 0.39 N.m across the 115–480 V three-phase range, with a continuous stall current of 1.5 A. Peak stall torque hits 1.5 N.m at 480 V three-phase, drawing 7.2 A for up to 3 seconds — enough for acceleration bursts without tripping the drive's I²t limit. Stator resistance is 11.6 Ohm and inductance is 12.8 mH — these set the electrical time constant and influence the drive's current-loop tuning. Torque constant is 0.26 N.m/A at 120 °C copper hot, which is the realistic operating temperature for continuous duty. Back EMF constant is 18 V/krpm at 20 °C — at 9000 rpm the motor generates 162 V line-to-line, which must stay below the drive's DC bus voltage for proper current regulation.","metaTitle":"Schneider Electric SH30402P17A2100 Servo Motor, 290 W","metaDescription":"Schneider Electric SH30402P17A2100 SH3 servo motor, 290 W continuous power, 0.31 N.m at 480 V three-phase, 9000 rpm, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P17A2100","Length":"93.4 mm","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, SinCos Multiturn 16, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0419 kg.cm²","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"12.8 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a228eaaa17697795cbcc2870c307167a.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30402P17A2100/sh3-servomotor-40mm-2-stacks-keyed-shaft-sincos-multiturn-16-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is SH30402P17A2100's listed length?","answer":"The motor body length is 93.4 mm, not including the shaft extension or connector. This is the dimension from the mounting flange face to the rear of the housing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P17A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P17A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}