{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P17F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P17F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30402P17F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P17F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, 40 mm flange, 8 mm shaft with parallel key, 119.4 mm length, 0.31 Nm nominal torque at 480 V three-phase, 9000 rpm maximum mechanical speed, Absolute multiturn SinCos Hiperface encoder, IP65 motor.","salesMarkdown":"## 40 mm flange, 8 mm shaft — fits the compact axis The SH30402P17F2000 is a 40 mm flange-size servo motor from the Schneider SH3 family, 119.4 mm body length, with an 8 mm diameter shaft and a 3 mm parallel key. The shaft runs 25 mm long with a 2.5 mm centring collar depth — the mounting pattern is four 4.5 mm holes on a 30 mm centring collar, matching the international standard flange for this frame size. The rotatable right-angle connector lets the cable exit in any of four orientations, which simplifies routing in a crowded control cabinet or on a moving gantry. ## Speed-torque envelope across supply voltages This motor delivers 0.31 Nm nominal torque at 400 V or 480 V three-phase, with a nominal speed of 9000 rpm at those voltages. On single-phase 115 V or 230 V, nominal torque drops to 0.292 Nm and speed to 4000 rpm — the drive selection must match the supply available on site. Continuous power is 290 W, and peak stall torque reaches 1.5 Nm at 480 V three-phase. The continuous stall torque is 0.39 Nm across the three-phase voltage range, with a continuous stall current of 1.5 A. Maximum current Irms is 7.2 A, and the same figure applies as the 3-second peak output current. ## Feedback and holding brake — what the encoder and brake ratings mean The Absolute multiturn SinCos Hiperface encoder provides absolute position feedback over multiple shaft revolutions, with sine-cosine signals for high-resolution interpolation. This is the standard feedback type for closed-loop servo drives that need position retention after power cycle — no homing sequence required on restart. The holding brake delivers 0.4 Nm holding torque and is engaged when power is removed. This keeps the vertical load from dropping on a Z-axis or conveyor stop — the brake torque exceeds the nominal motor torque, so it holds the shaft against the rated load even if the drive loses power. Motor constants help the drive tune current loops: torque constant 0.26 Nm/A at 120 °C copper temperature, back EMF constant 18 V/krpm at 20 °C. Stator resistance is 11.6 Ohm and inductance 6.4 mH — these feed into the drive's auto-tuning routine for current regulator gains. ## IP rating and cooling — where it runs sealed The motor is rated IP65 with the shaft bushing and seal ring installed, per IEC 60034-5. Without the shaft seal ring, the shaft bushing alone is IP54. Cooling is natural convection — no external fan or liquid cooling. The continuous torque and power ratings assume free air circulation around the motor body; mounting it in a confined pocket or against a heat source will require derating.","metaTitle":"Schneider SH30402P17F2000 Servo Motor with Brake, 0.31 Nm","metaDescription":"Schneider Electric SH30402P17F2000 servo motor with brake, 40 mm flange, 290 W continuous, 9000 rpm max, Absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P17F2000","Length":"119.4 mm","Inertia":"0.017 kg.cm² of brake 0.042 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, SinCos Multiturn 16, Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,423.98","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/85ccfa9231f3254e0ce47c00575cd9ce.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30402P17F2000/sh3-servomotor-40mm-2-stacks-keyed-shaft-sincos-multiturn-16-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the shaft size and key on SH30402P17F2000?","answer":"The shaft diameter is 8 mm with a 3 mm key width, parallel key type. Shaft length is 25 mm."},{"question":"What compliance documentation does Schneider provide for SH30402P17F2000?","answer":"The motor carries IP ratings per IEC 60034-5. Standard Schneider documentation includes the EU Declaration of Conformity and product certificate — request these with your RFQ for RoHS/REACH/UL status specific to your shipment destination."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P17F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P17F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}