{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P17F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P17F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30402P17F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P17F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30402P17F2100, 290 W continuous power, 0.4 Nm holding brake, IP65, absolute multiturn SinCos Hiperface encoder, 40 mm flange.","salesMarkdown":"## Speed and torque across supply voltages The SH30402P17F2100: This SH3 servo motor delivers 4000 rpm nominal on single-phase 115 V or 230 V, and 9000 rpm on three-phase 400 V or 480 V supply. The nominal torque ranges from 0.292 N.m on single-phase to 0.31 N.m on three-phase, with a peak stall torque of 1.5 N.m at 480 V three-phase. The continuous stall torque is 0.39 N.m across the three-phase voltage range, and the holding brake provides 0.4 N.m — enough to hold a vertical axis load at rest without continuous power to the motor windings. ## Encoder, feedback, and integration constraints Fitted with an absolute multiturn SinCos Hiperface encoder — this is a single-cable feedback system that reports absolute position over multiple shaft revolutions, so the controller knows the axis position immediately on power-up without a homing move. The rotatable right-angled connector allows the cable exit to be oriented to suit tight cabinet layouts. The motor flange is 40 mm (IEC standard), with a 30 mm centring collar and 2.5 mm collar depth. Four mounting holes on a 4.5 mm diameter circle secure it to the machine frame. The 8 mm shaft with a 3 mm parallel key and 25 mm shaft length is a common interface for small couplings and pulleys. ## Thermal and electrical parameters for drive sizing The stator resistance is 11.6 Ohm and inductance 6.4 mH — these values set the electrical time constant and influence the current-loop tuning in the servo drive. The back EMF constant is 18 V/krpm at 20 °C, and the torque constant is 0.26 N.m/A at 120 °C copper temperature. ## Environmental protection and cooling IP65 rated per IEC 60034-5 on both the motor body and the shaft bushing — this means the motor is dust-tight and protected against low-pressure water jets from any direction. Suitable for washdown environments in food processing or packaging lines where hose cleaning is routine. Cooling is by natural convection — no external fan or forced air required. This simplifies installation in clean-room or dust-sensitive areas but means the continuous torque rating assumes free air circulation around the motor housing.","metaTitle":"Schneider Electric SH30402P17F2100 Servo Motor","metaDescription":"Schneider Electric SH30402P17F2100 SH3 servo motor with holding brake. 290 W continuous, 0.4 Nm holding torque, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P17F2100","Length":"119.4 mm","Inertia":"0.017 kg.cm² of brake 0.042 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, SinCos Multiturn 16, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"6.4 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"7.2 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,464.48","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a23a0f60c33b0645a892e948e4581034.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30402P17F2100/sh3-servomotor-40mm-2-stacks-keyed-shaft-sincos-multiturn-16-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the SH30402P17F2100's continuous power rating?","answer":"The continuous power is 290 W. The nominal output power varies with supply voltage: 152 W at 115 V or 230 V single-phase, 275 W at 400 V three-phase, and 289 W at 480 V three-phase."},{"question":"What compliance documentation does Schneider Electric provide for SH30402P17F2100?","answer":"The motor carries an IP65 rating conforming to IEC 60034-5. The encoder type and electrical connection are documented in the product specification. For RoHS, REACH, and UL declarations, the relevant compliance certificates are available from Schneider Electric's documentation portal tied to this order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P17F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P17F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}