{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P1CA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P1CA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30402P1CA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P1CA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, sizing reference SH30402P, Hiperface DSL absolute single-turn encoder, 40 mm flange, 104.9 mm length, 8 mm shaft with 3 mm parallel key, 0.37 Nm nominal at 230 V single-phase / 0.31 Nm at 400–480 V three-phase, 290 W continuous, IP65 motor body.","salesMarkdown":"## SH30402P1CA4000 in the cabinet — where this 40 mm servo sits The SH30402P1CA4000 is a Schneider Electric SH3 series servo motor (sizing reference SH30402P), built as the compact low-inertia end of the Lexium/SerMov-compatible drive family for short-cycle point-to-point moves on packaging, labelling and small-format pick-and-place cells where a 0.37 Nm continuous torque and 290 W continuous power rating are sufficient. ## Speed and torque envelope across the supply Nominal torque is 0.37 Nm on 230 V single-phase and 0.31 Nm on 400 V or 480 V three-phase; nominal speed tracks the same way — 4000 rpm at 230 V versus 9000 rpm at 400/480 V — so the same motor winding delivers different mechanical output depending on which drive rail feeds it. Nominal output power is 152 W at 230 V single-phase and 292 W at 400/480 V three-phase. Continuous stall torque is 0.39 Nm from 115 V up to 480 V three-phase with a continuous stall current of 1.5 A; peak stall torque reaches 1.5 Nm at 480 V three-phase, which gives roughly 4× the continuous figure for the acceleration pulse that gets a horizontal conveyor or rotary table up to speed. Maximum mechanical speed is 10000 rpm, so any application profile above that is outside the rotor envelope. ## Feedback, connector and shaft-side sealing Position feedback is an absolute single-turn Hiperface DSL encoder at 32768 points/turn — a single-cable digital link that returns absolute position without a battery back-up and consolidates power and data on one cable to the drive, simplifying cabinet routing. The motor-side electrical connection is a rotatable right-angled quicklock connector, so the lead exit direction can be set after the motor is bolted down without rotating the housing. IP65 on the motor body and IP54 on the shaft bushing without a shaft seal ring — the rating covers water-jet washdown on a food-grade conveyor but the shaft entry is the weak point if the line runs in a wet zone with no seal ring fitted. Centring collar is 30 mm diameter by 2.5 mm deep, mounting holes are 4 × 4.5 mm on the standard 40 mm flange. No holding brake is fitted on this build (SH30402P1CA4000). For a vertical-axis or suspended load, that rules the motor out unless an external safety brake is added in the drivetrain — for horizontal rotary tables and belt-driven conveyors it is the usual choice. ## Rotor and thermal headroom Cooling is natural convection only, with a copper-hot winding ceiling of 130 °C; the continuous stall current of 1.5 A is the limit the drive should hold indefinitely without pushing the winding into thermal trip.","metaTitle":"Schneider SH30402P1CA4000 Servo Motor, 0.37 Nm, 4000 rpm","metaDescription":"Schneider Electric SH30402P1CA4000 SH3 servo motor, 0.37 Nm nominal torque at 230 V, Hiperface DSL encoder, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P1CA4000","Length":"104.9 mm","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, Singleturn DSL 15bit, no Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"25 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0419 kg.cm²","Nominal torque":"0.37 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Product weight":"0.6 kg","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"12.8 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 230 V single phase 292 W at 400 V three phase 292 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"5","Temperature copper hot":"130 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"10000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9ba2cd106b28a9c83fc80f0d3ca3e921.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30402P1CA4000/sh3-servomotor-40mm-2-stacks-keyed-shaft-singleturn-dsl-15bit-no-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What is SH30402P1CA4000's length and shaft format?","answer":"Body length is 104.9 mm, shaft diameter 8 mm with a parallel key 3 mm wide and 25 mm long, on a 40 mm international-standard flange. Centring collar is 30 mm diameter by 2.5 mm deep, with 4 × 4.5 mm mounting holes."},{"question":"What is the closest alternative within the SH3 40 mm frame?","answer":"The sibling SH30402P sizing reference covers the same 40 mm flange, 104.9 mm length and Hiperface DSL feedback, with the holding-brake option code as the differentiating suffix — units fitted with a brake are the usual cross-reference when an axis originally specified a braked servo. No pin-compatible third-party alternative is recorded for this winding."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P1CA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P1CA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}