{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P1CA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P1CA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30402P1CA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P1CA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH30402P1CA4100 servo motor, 40 mm flange, 104.9 mm length, 0.37 N.m nominal torque, Hiperface DSL encoder, IP65, without brake.","salesMarkdown":"## Form factor and how it lands on the machine The SH30402P1CA4100 ships in the SH3 family footprint: a 40 mm motor flange with a 30 mm centring collar, an 8 mm shaft cut 25 mm long with a 3 mm parallel key, and four 4.5 mm mounting holes on the international standard flange — a body that bolts directly into the matching gearhead or planetary reducer bore without an adapter plate. The electrical hook-up is a quick-lock rotatable right-angle connector, so the cable dress can be set after the motor is bolted down without rotating the housing itself. ## Torque, speed, and the ratings that decide fit Nominal torque is 0.37 N.m at 230 V single-phase and 0.31 N.m at both 400 V and 480 V three-phase, on a nominal speed ladder of 4000 rpm at 230 V single-phase against 9000 rpm at 400 V and 480 V three-phase — the three-phase connection roughly doubles the usable speed envelope and is what the sizing curve assumes for production machines. Continuous power lands at 290 W, with nominal output power of 152 W at 230 V single-phase and 292 W at 400 V or 480 V three-phase, and the continuous stall torque holds at 0.39 N.m across 115 V to 480 V — meaning the motor holds its rated torque at zero speed within that voltage window, which matters for vertical-axis and press applications. Peak stall torque reaches 1.5 N.m at 480 V three-phase against a continuous stall current of 1.5 A and a maximum Irms of 7.2 A — the 4.8× peak-to-continuous margin is what the drive uses for accel/decel pulses on indexing moves, and the drive sizing must respect the Irms ceiling, not just the continuous figure. Back-EMF constant of 18 V/krpm at 20 °C and torque constant of 0.26 N.m/A at 120 °C set the drive's current-loop gain and the regen clamp level — the 0.26 figure is the hot value, so cold-loop gains at first commissioning will read lower until the winding warms to its 130 °C copper-hot ceiling. Maximum mechanical speed is 10000 rpm — above the 9000 rpm three-phase nominal, so the headroom is narrow and the drive's velocity-loop filter should clamp the command just under the 10000 rpm ceiling to avoid encoder-counted overshoots on fast stops. ## Feedback, environment, and what is not on this build Feedback is an absolute single-turn Hiperface DSL encoder at 32768 points/turn, the single-cable digital protocol that combines power and feedback on the quick-lock connector and simplifies the cabinet-to-axis wiring run. Cooling is natural convection — no integrated fan — and the motor and shaft bushing both carry IP65 to IEC 60034-5, so the body tolerates washdown splash and dust ingress typical of packaging and food-adjacent lines, but it is not rated for high-pressure cleaning or full submersion. This build ships without a holding brake — the listing confirms 'without' — so any vertical-axis or gravity-loaded application needs a brake on the gearhead side or an external failsafe, since the motor itself cannot hold position on power loss.","metaTitle":"Schneider Electric SH30402P1CA4100 SH3 Servo Motor, 0.37 N.m","metaDescription":"Schneider Electric SH30402P1CA4100 SH3 servo motor, 40 mm flange, 0.37 N.m nominal torque at 4000 rpm, Hiperface DSL encoder. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P1CA4100","Length":"104.9 mm","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, Singleturn DSL 15bit, no Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"25 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0419 kg.cm²","Nominal torque":"0.37 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Product weight":"0.6 kg","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"12.8 mH","Stator resistance":"11.6 Ohm","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 230 V single phase 292 W at 400 V three phase 292 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"5","Temperature copper hot":"130 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"10000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dc677487f7f94cf2514631f63f720475.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30402P1CA4100/sh3-servomotor-40mm-2-stacks-keyed-shaft-singleturn-dsl-15bit-no-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"Who supplies SH30402P1CA4100 and how is it quoted for volume?","answer":"SH30402P1CA4100 is sourced through independent distribution against an RFQ, with current pricing and lead time confirmed at quote time for both prototype and production quantities — the part is not held as a stock-shelf SKU, so volume orders are quoted to order rather than pulled from ready inventory."},{"question":"What is SH30402P1CA4100's listed key width?","answer":"Key width on SH30402P1CA4100 is 3 mm on an 8 mm shaft with a parallel-key cut 25 mm long — the dimensions that have to match the mating gear or coupling bore before the motor lands on the machine."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P1CA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P1CA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}