{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30402P1CF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30402P1CF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30402P1CF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30402P1CF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, 40 mm flange, 0.4 N.m holding torque, 4000 rpm at 230 V single phase, Hiperface DSL encoder, IP65.","salesMarkdown":"## Lifecycle and what the BOM line can rely on The SH30402P1CF4100: The device short name is SH3 and the sizing reference SH30402P, which tells an integrator they are looking at the 40 mm flange, low-inertia servo motor line, not a higher-power SH4-frame unit. ## Torque, speed and voltage envelope Continuous power is 290 W and nominal speed is 4000 rpm at 230 V single phase, scaling to 9000 rpm at both 400 V and 480 V three phase — so the same motor delivers three different speed points depending on which drive bus it lands on. Holding torque is 0.4 N.m, continuous stall torque 0.39 N.m across 115 to 480 V three phase, and peak stall torque 1.5 N.m at 480 V three phase — useful for sizing the acceleration margin against the driven load. Nominal output power is 152 W at 230 V single phase and 292 W at 400 V or 480 V three phase, so the single-phase supply noticeably derates continuous mechanical output versus the three-phase rails. Maximum mechanical speed is 10000 rpm — the application ceiling before bearing damage risk — and maximum current Irms is 7.2 A, which the drive sizing has to respect under peak demand. ## Brake, encoder, electrical hookup An integrated holding brake is included, rated 0.4 N.m holding with a 5.8 W pull-in coil — sized to hold the rotor at standstill when the drive is de-energised, which is the standard choice for vertical or suspended axes. Encoder is absolute single-turn Hiperface DSL, which means position feedback travels over the same cable as power on a quicklock rotatable right-angled connector — one cable run back to the drive instead of two. ## Form factor and panel-side mounting International standard flange with a 40 mm flange size, 4 mounting holes at 4.5 mm diameter on a 30 mm centring collar at 2.5 mm depth — a standard NEMA-style flange footprint that bolts into most small-format gearheads and linear actuators. Shaft end is parallel key with a 3 mm key width, 25 mm shaft length and 8 mm shaft diameter — confirm the mating coupling or pinion matches these dimensions before committing the BOM. IP65 rating on both motor body and shaft bushing per IEC 60034-5, with natural convection cooling — sealed enough for washdown-adjacent cells and food-and-bev conveyor zones, but not for direct jet spray or immersion duty. ## Thermal and electrical constants for drive commissioning Torque constant is 0.26 N.m/A at 120 °C and back-EMF constant 18 V/krpm at 20 °C — the two figures the drive auto-tune loop leans on during the first commissioning pass. Five motor poles and temperature copper hot limit 130 °C — the thermal ceiling the drive's I²T model monitors during repeated acceleration cycles.","metaTitle":"Schneider SH30402P1CF4100 Servo Motor, 0.4 N.m, 4000 rpm","metaDescription":"Schneider SH3 servo motor with brake, 0.4 N.m holding, 4000 rpm at 230 V single-phase, IP65. Lifecycle current; quoted to order against the BOM at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30402P1CF4100","Length":"130.9 mm","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 40mm, 2 stacks, keyed Shaft, Singleturn DSL 15bit, Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.0588 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.37 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase","Product weight":"0.75 kg","Shaft diameter":"8 mm","Torque constant":"0.26 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"18 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"1.5 N.m at 480 V three phase","Stator inductance":"12.8 mH","Stator resistance":"11.6 Ohm","Brake pull-in power":"5.8 W","Maximum current Irms":"7.2 A","Nominal output power":"152 W at 230 V single phase 292 W at 400 V three phase 292 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"5","Temperature copper hot":"130 °C","Continuous stall torque":"0.39 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.5 A","Maximum mechanical speed":"10000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ebd54f95c4ba7b3fa5399d1f5e97b1f2.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30402P1CF4100/sh3-servomotor-40mm-2-stacks-keyed-shaft-singleturn-dsl-15bit-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"What is the SH30402P1CF4100's listed length on this Servo Motors with Brake line?","answer":"Length is 130.9 mm and product weight 0.75 kg for the SH30402P1CF4100 — the dimension an integrator uses to confirm the motor fits the available envelope behind the gearbox or along the linear slide."},{"question":"What is the SH30402P1CF4100's listed key width on this Servo Motors with Brake line?","answer":"Key width is 3 mm on a parallel-key shaft, with 25 mm shaft length and 8 mm shaft diameter — confirm the mating coupling or pinion keyseat matches these dimensions before committing the BOM."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30402P1CF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30402P1CF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}