{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30551P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30551P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30551P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30551P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30551P02A2200, three-phase, 400 W nominal output at 400 V, 6000 rpm, 0.5 N·m nominal torque, IP65, smooth shaft, absolute multiturn SinCos Hiperface encoder, natural convection cooling.","salesMarkdown":"## Motor ratings that decide the drive match The SH30551P02A2200: Peak stall torque hits 1.5 N·m across the 115–480 V three-phase range, and the continuous stall torque is 0.42 N·m at 0.73 A — the 2.9 A peak current (3 s rating) tells you the drive's current loop needs to supply that surge without tripping. The absolute multiturn SinCos Hiperface encoder means no homing cycle on power-up — the drive reads the shaft position from the encoder's battery-backed multi-turn count. This saves a full minute per axis on every cold start. ## IP65 and the washdown reality IP65 on the motor body and shaft bushing per IEC 60034-5, with IP67 on the housing — the connector is a rotatable right-angled type, so the cable exit can be clocked to clear the machine frame. In a food or washdown zone, the smooth shaft means no keyway to trap debris, but you still need a shaft seal at the coupling end. Natural convection cooling — no fan, so the 290 W continuous power is the thermal limit at rated ambient. If the machine cycles hard, budget a duty-cycle derate or add forced air. ## Mounting and mechanical fit International standard flange, 55 mm square, with a 40 mm centring collar and 5.5 mm mounting holes on the bolt circle. The shaft is 9 mm diameter, 20 mm long, smooth — no key, so the coupling must be a clamp type with a setscrew over the flat or a friction grip. Overall length is 132.5 mm. The centring collar depth is 2 mm — that's the register depth into the mating flange, so the motor face sits flush against the machine plate.","metaTitle":"Schneider Electric SH30551P02A2200 Servo Motor, 400 W","metaDescription":"Schneider Electric SH30551P02A2200 SH3 servo motor, 400 W nominal at 400 V three-phase, 6000 rpm, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30551P02A2200","Length":"5.2 in (132.5 mm)","Inertia":"0.0 kg.cm² of brake 0.059 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.059 kg.cm²","Nominal torque":"4.4 lbf.in (0.5 N.m) 115 V single phase 4.4 lbf.in (0.5 N.m) 230 V single phase 3.10 lbf.in (0.35 N.m) 400 V three phase 3.10 lbf.in (0.35 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.58 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting Support":"International standard flange","Sizing reference":"SH30551P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"13.3 lbf.in (1.5 N.m) 115...480 V three phase","Stator inductance":"37.13 mH","Stator resistance":"41.8 Ohm","Maximum current Irms":"2.9 A","Nominal output power":"100 W 115 V single phase 210 W 230 V single phase 400 W 400 V three phase 440 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"2.9 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"3.72 lbf.in (0.42 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"340 N 1000 rpm 270 N 2000 rpm 240 N 3000 rpm 220 N 4000 rpm 200 N 5000 rpm 190 N 6000 rpm 180 N 7000 rpm 170 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"0.73 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/62128253a3bd89a304bea9badd9ff23b.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30551P02A2200/sh3-servomotor-55mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What encoder type does the SH30551P02A2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This gives position feedback on power-up without a homing move — the multi-turn count is retained through a battery-backed circuit in the drive or encoder cable."},{"question":"Does the SH30551P02A2200 come with a holding brake?","answer":"No, this variant is specified without a holding brake. If the vertical axis needs brake holding, you will need a separate brake resistor in the drive or a motor with the brake option."},{"question":"What IP rating does the SH30551P02A2200 have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing, conforming to IEC 60034-5. The rotatable right-angled connector lets you orient the cable exit to maintain the seal in tight enclosures."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30551P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30551P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}