{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30551P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30551P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30551P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30551P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30551P02F2200, 290 W continuous power, 0.5 N.m nominal torque, 0.8 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft, 55 mm flange.","salesMarkdown":"The SH30551P02F2200 is a 290 W three-phase servo motor from the SH3 series, fitted with a holding brake and an absolute multiturn SinCos Hiperface encoder. The 0.8 N.m holding torque keeps the load locked when power is removed — essential for vertical axes or any application where the load must not drift during a power loss or at standstill. Nominal torque is 0.5 N.m on single-phase supplies (115 V or 230 V), dropping to 0.35 N.m on three-phase 400 V or 480 V supplies. The continuous stall torque is 0.42 N.m across the full voltage range, so the motor delivers rated torque even at zero speed for holding or positioning tasks. ## Speed range and power delivery across line voltages Nominal speed depends on the supply: 2000 rpm at 115 V single phase, 4000 rpm at 230 V single phase, and 6000 rpm on either 400 V or 480 V three phase. Nominal output power also shifts — 100 W on 115 V, 210 W on 230 V, 400 W on 400 V, and 440 W on 480 V. The 290 W continuous power rating sits between these operating points, so the actual delivered power depends on the drive voltage and the duty cycle. Peak stall torque reaches 1.5 N.m on three-phase supplies (115...480 V), giving the axis a short-term overload capability for acceleration or overcoming friction during start-up. The maximum current Irms is 2.9 A, with the same 2.9 A peak output current for 3 seconds. ## Encoder feedback and environmental sealing The absolute multiturn SinCos Hiperface encoder provides position feedback without needing a home cycle after power-up — the multiturn count tracks absolute position over multiple shaft revolutions. This saves time on commissioning and eliminates the homing sequence on each power cycle. IP65 protection on the motor body and shaft bushing, with IP67 on the housing, means the motor withstands washdown environments and airborne particulates. Natural convection cooling keeps the design simple — no fan or external blower required, but the thermal limit (130 °C copper hot) must be respected in the duty cycle. ## Mounting and connection details for panel integration The motor uses an international standard flange with a 55 mm flange size and a 40 mm centring collar. The smooth shaft (9 mm diameter, 20 mm length) accepts a clamp-type coupling — no keyway, so the coupling must transmit torque through friction or a set-screw interface. Electrical connection is via a rotatable right-angled connector, which lets the cable exit in the direction that best fits the machine frame or cable track. Overall length is 159 mm (6.3 in), with a 2 mm centring collar depth.","metaTitle":"Schneider Electric SH30551P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30551P02F2200 servo motor with brake, 290 W continuous power, 0.8 N.m holding torque, absolute multiturn encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30551P02F2200","Length":"6.3 in (159 mm)","Inertia":"0.021 kg.cm² of brake 0.059 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"With","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.08 kg.cm²","Holding torque":"7.08 lbf.in (0.8 N.m)","Nominal torque":"4.4 lbf.in (0.5 N.m) 115 V single phase 4.4 lbf.in (0.5 N.m) 230 V single phase 3.10 lbf.in (0.35 N.m) 400 V three phase 3.10 lbf.in (0.35 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.58 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"290 W","Mounting Support":"International standard flange","Sizing reference":"SH30551P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"13.3 lbf.in (1.5 N.m) 115...480 V three phase","Stator inductance":"37.13 mH","Stator resistance":"41.8 Ohm","Maximum current Irms":"2.9 A","Nominal output power":"100 W 115 V single phase 210 W 230 V single phase 400 W 400 V three phase 440 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"2.9 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"3.72 lbf.in (0.42 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"340 N 1000 rpm 270 N 2000 rpm 240 N 3000 rpm 220 N 4000 rpm 200 N 5000 rpm 190 N 6000 rpm 180 N 7000 rpm 170 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"0.73 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/efa94476c8c349b0bf77f7cb7f2ec958.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30551P02F2200/sh3-servomotor-55mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is SH30551P02F2200's phase and power rating?","answer":"It is a three-phase servo motor with 290 W continuous power. Nominal torque is 0.5 N.m on single-phase supplies and 0.35 N.m on three-phase supplies, with a holding brake rated at 0.8 N.m."},{"question":"What encoder type does SH30551P02F2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which provides absolute position feedback over multiple revolutions without requiring a homing cycle after power-up."},{"question":"What is the IP rating and environmental protection?","answer":"The motor body and shaft bushing are rated IP65, and the housing is rated IP67, conforming to IEC 60034-5. This makes it suitable for washdown environments and applications with airborne dust or moisture."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30551P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30551P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}