{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P02A2100, 530 W continuous power, 6000 rpm, three-phase, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft.","salesMarkdown":"## Three-phase servo motor with supply-dependent speed envelope The SH30552P02A2100 is a Schneider Electric SH3 series servo motor rated for three-phase supply, delivering a nominal speed of 6000 rpm at 400 V or 480 V three-phase, 4000 rpm at 230 V single-phase, and 2000 rpm at 115 V single-phase. Continuous power is 530 W, with nominal output power ranging from 160 W (115 V single-phase) up to 670 W (480 V three-phase), so the usable torque-speed curve shifts with the available line voltage. ## Encoder feedback and mechanical interface An absolute multiturn SinCos Hiperface encoder provides position feedback — no homing sequence needed on power-up, which matters for applications where the axis position must be known immediately after a cycle or power loss. The shaft is smooth, 9 mm diameter by 20 mm length, with a 55 mm flange and 40 mm centring collar — coupling selection and motor mount alignment follow these dimensions. The rotatable right-angled connector lets the cable exit direction be adjusted in the field, useful when panel clearance is tight or the cable route changes during installation. ## Torque capability and thermal limits Peak stall torque is 2.5 Nm (22.1 lbf.in) across the 115–480 V three-phase range, while continuous stall torque is 0.71 Nm (6.28 lbf.in) — the motor can deliver roughly 3.5× rated torque briefly for acceleration, but the drive's current limit must be set to 4.8 A peak to stay within the winding's thermal capability. ## Environmental sealing and bearing loads Maximum radial force at the shaft drops from 370 N at 1000 rpm to 190 N at 8000 rpm — the bearing load capacity decreases with speed, so belt-drive or overhung-load applications must be checked against this curve.","metaTitle":"Schneider Electric SH30552P02A2100 Servo Motor, 530 W","metaDescription":"Schneider Electric SH30552P02A2100 SH3 servo motor, 530 W continuous, 6000 rpm max, IP65, absolute Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30552P02A2100","Length":"6.08 in (154.4 mm)","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/334dee4f3ba4c8649ba9428073e4c373.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30552P02A2100/sh3-servomotor-55mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the SH30552P02A2100's phase configuration?","answer":"The motor is designed for three-phase supply, but its speed and torque vary with the input voltage — 6000 rpm at 400/480 V three-phase, 4000 rpm at 230 V single-phase, and 2000 rpm at 115 V single-phase."},{"question":"What encoder type does the SH30552P02A2100 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which retains position data through power cycles and eliminates the need for a reference run on startup."},{"question":"Is the SH30552P02A2100 suitable for washdown environments?","answer":"Yes, the motor and shaft bushing carry an IP65 rating per IEC 60034-5, meaning it withstands hose-directed water and dust ingress — appropriate for food processing or wet industrial areas."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}