{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30552P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P02A2200, 600 W nominal at 400 V three-phase, 6000 rpm, absolute multiturn SinCos Hiperface encoder, smooth shaft, IP65, natural convection cooling.","salesMarkdown":"## Speed and torque across the supply range The SH30552P02A2200: This motor delivers 6000 rpm on a 400 V or 480 V three-phase supply, but drops to 2000 rpm on 115 V single-phase and 4000 rpm on 230 V single-phase — the speed ceiling is supply-voltage dependent, not a fixed nameplate number. Nominal torque follows the same pattern: 0.63 N·m at 400/480 V three-phase, versus 0.77 N·m at 115 V single-phase and 0.75 N·m at 230 V single-phase. The motor is most torque-dense on the lower-voltage single-phase supply, but the speed penalty is steep. Continuous power is 530 W, with nominal output power rated at 600 W on 400 V three-phase and 670 W on 480 V three-phase — the extra 70 W on 480 V comes from the higher bus voltage before the drive limits current. ## Encoder and feedback for closed-loop control The absolute multiturn SinCos Hiperface encoder gives position feedback on power-up without a homing sequence — essential for applications where the axis position must be known immediately after a power cycle, like pick-and-place or gantry systems. The encoder type pairs with Schneider's Lexium drive family; the Hiperface protocol carries both position and temperature data on the same pair of wires, reducing cabling compared to incremental encoder setups. ## Environmental sealing and mechanical fit IP65 on the motor body and shaft bushing, plus IP67 on the housing — this motor handles washdown and dust ingress without a secondary cover, suitable for food processing or packaging lines where hose-down cleaning is routine. Smooth shaft, no holding brake, and a 55 mm flange with a 9 mm shaft diameter and 20 mm shaft length — it mounts to standard international flange patterns, but the smooth shaft means the load coupling relies entirely on the clamping force of the shaft collar, not a keyway. Natural convection cooling — no fan, so the motor relies on its own surface area and the machine frame for heat rejection. In a confined enclosure or high-ambient environment, the continuous torque may need derating below the 0.71 N·m stall figure. ## Peak and continuous torque capability Peak stall torque hits 2.5 N·m across the 115–480 V three-phase range, but only for short bursts — the continuous stall torque is 0.71 N·m at 1.2 A continuous stall current. The 4.8 A peak current (3-second rating) supports acceleration and deceleration cycles without tripping the drive. ## Sourcing and lifecycle status No stock-holding claim — each RFQ is handled on its own volume and lead-time terms.","metaTitle":"Schneider Electric SH30552P02A2200 Servo Motor, 600 W","metaDescription":"Schneider Electric SH30552P02A2200 SH3 servo motor, 600 W at 400 V three-phase, 6000 rpm, absolute multiturn encoder, IP65. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30552P02A2200","Length":"6.08 in (154.4 mm)","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,527.12","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/37a1275646cbb39cb17605cb440fb25b.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30552P02A2200/sh3-servomotor-55mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is SH30552P02A2200's listed phase configuration?","answer":"The motor is listed as three-phase, but it also operates on single-phase supplies at reduced speed — 2000 rpm on 115 V single-phase and 4000 rpm on 230 V single-phase, versus 6000 rpm on 400 V or 480 V three-phase."},{"question":"What compliance documentation does Schneider Electric provide for SH30552P02A2200?","answer":"The motor carries IP65/IP67 ratings conforming to IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}