{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P02F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P02F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P02F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P02F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30552P02F2100, 530 W continuous power, 0.8 N·m holding torque, absolute multiturn SinCos Hiperface encoder, IP65, 55 mm flange, smooth shaft.","salesMarkdown":"## Frame size, feedback, and the holding brake The SH30552P02F2100 is a 55 mm flange servo motor (2.2 in) from the SH3 family, with a smooth shaft measuring 9 mm diameter and 20 mm length — a standard international flange mount that bolts directly to a gearbox or machine frame without a keyway. Feedback comes from an absolute multiturn SinCos Hiperface encoder — single-turn position is known on power-up, no homing cycle needed after a power loss, and the multiturn count tracks absolute revolutions over the full travel range. The holding brake delivers 0.8 N·m (7.08 lbf·in) static torque, enough to hold a vertical axis load at rest without power to the motor windings — the brake engages when the drive removes the 24 VDC release voltage. ## Speed-torque envelope across supply voltages Nominal speed depends on the supply: 2000 rpm on 115 V single-phase, 4000 rpm on 230 V single-phase, and 6000 rpm on 400 V or 480 V three-phase — the motor reaches its highest speed only when fed from a three-phase drive at 400 V or 480 V. Nominal torque also shifts with voltage: 0.77 N·m (6.82 lbf·in) at 115 V single-phase, 0.75 N·m at 230 V single-phase, and 0.63 N·m (5.58 lbf·in) at 400 V or 480 V three-phase — the torque drops at higher speeds because the constant-power region extends beyond the base speed. Continuous stall torque is 0.71 N·m (6.28 lbf·in) across the 115–480 V three-phase range, and peak stall torque reaches 2.5 N·m (22.1 lbf·in) — useful for short acceleration bursts or breaking through static friction. ## Thermal limits and environmental sealing Cooling is by natural convection — no fan, so the motor relies on the machine frame or mounting plate to conduct heat away; the copper winding hot-spot temperature is rated to 130 °C (266 °F). The motor body and shaft bushing both carry IP65 per IEC 60034-5 — sealed against dust ingress and low-pressure water jets, suitable for washdown areas on packaging or food-processing lines where the connector is properly mated. No stock-holding claim — quoted per order.","metaTitle":"Schneider Electric SH30552P02F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30552P02F2100 SH3 servo motor with brake, 530 W continuous power, 0.8 N·m holding torque, absolute multiturn Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30552P02F2100","Length":"7.1 in (181 mm)","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"With","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"7.08 lbf.in (0.8 N.m)","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0d875c749dc9a43825845823097e3ff1.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30552P02F2100/sh3-servomotor-55mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What encoder type does SH30552P02F2100 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder — absolute position on power-up, no homing sequence required after a power cycle."},{"question":"What is the holding torque of the brake on SH30552P02F2100?","answer":"The holding brake provides 0.8 N·m (7.08 lbf·in) static torque, sufficient to hold a vertical axis load when the motor is unpowered."},{"question":"How can I order SH30552P02F2100 or check availability?","answer":"No stock-holding claim; submit an RFQ for the BOM quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P02F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P02F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}