{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30552P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30552P02F2200, 530 W, 6000 rpm, 0.77 N.m nominal torque, 2.5 N.m peak stall torque, absolute multiturn SinCos Hiperface encoder, smooth shaft, IP65 motor.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH30552P02F2200 delivers nominal speed that scales with supply: 2000 rpm on 115 V single phase, 4000 rpm on 230 V single phase, and 6000 rpm on 400 V or 480 V three phase. Nominal torque drops from 0.77 N.m at 115 V to 0.63 N.m at 400/480 V three phase, so the torque-per-amp tradeoff shifts with the input rail you have on site. Peak stall torque is 2.5 N.m across the 115–480 V three-phase range, giving you a 3.2× overload margin above the 0.77 N.m nominal — enough for short acceleration bursts on a pick-and-place gantry without tripping the drive's current limit. ## Encoder feedback and tuning implications This motor carries an absolute multiturn SinCos Hiperface encoder — the multiturn count tracks position through power cycles, so homing on power-up is unnecessary on a machine that parks in a known position. SinCos interpolation gives the drive fine velocity feedback, which helps the current loop settle faster on low-inertia loads. ## Mounting, shaft, and environmental sealing The motor uses a 55 mm (2.2 in) international standard flange with a 40 mm centring collar and 5.5 mm mounting holes — fits the common B5-style mounting pattern for servo motors in that frame size. The smooth shaft is 9 mm diameter with a 20 mm shaft length, so couplings or pulleys need a clamping bore, not a keyway. IP65 on the motor body and shaft bushing, IP67 on the housing — the shaft bushing seal is the wet-end barrier, so washdown applications need the connector mated and the sealing washer seated. Natural convection cooling means no fan noise, but the 530 W continuous power assumes free airflow around the flange; derate if enclosed in a tight cabinet. ## Electrical parameters and connection Stator resistance is 17.4 Ω and inductance is 53.54 mH — the high inductance limits current ripple at the drive's PWM frequency, which helps keep the motor cool at low speeds. Maximum current Irms is 4.8 A, and the 3 s peak output matches that same 4.8 A, so the drive's current limit should be set to 4.8 A RMS to protect the windings. The electrical connection is a rotatable right-angled connector — useful when the cable exit needs to point toward the cable tray rather than straight out the back. Torque constant is 0.59 N.m/A at 120 °C copper temperature, so at the 4.8 A peak you get 2.83 N.m theoretical — slightly above the 2.5 N.m peak stall spec, meaning the motor is thermally limited before the magnetic circuit saturates.","metaTitle":"Schneider Electric SH30552P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30552P02F2200 servo motor with brake, 530 W continuous power, 6000 rpm, absolute multiturn Hiperface encoder, IP65/IP67. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30552P02F2200","Length":"7.1 in (181 mm)","Inertia":"0.021 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"With","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"7.08 lbf.in (0.8 N.m)","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"53.54 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/55a521587de7d0303a8ba06bf0078dfa.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30552P02F2200/sh3-servomotor-55mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the holding brake torque on the SH30552P02F2200?","answer":"The holding brake delivers 0.8 N.m (7.08 lbf.in) — sufficient to hold the motor shaft stationary when power is removed, preventing a vertical axis from dropping."},{"question":"What compliance documentation does Schneider Electric provide for the SH30552P02F2200?","answer":"The motor carries IP65/IP67 protection per IEC 60034-5. Standard Schneider documentation includes the CE declaration of conformity and the product data sheet; RoHS and REACH compliance information is available on request."},{"question":"Where can I buy the SH30552P02F2200 and how is it quoted?","answer":"Submit an RFQ for current pricing and availability — no minimum order quantity applies."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}