{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P0AA4000, 55 mm flange, smooth shaft, Hiperface DSL encoder, 530 W continuous, 0.75 N.m nominal.","salesMarkdown":"## Continuous power and where the SH3 frame sits The Schneider Electric SH30552P0AA4000 is the SH3 short-frame servo at 55 mm flange, listed at 530 W continuous power and 280 W on a 230 V single-phase feed — so the same motor stretches roughly 1.9× in continuous power once it sees three-phase 400 V or 480 V instead of single-phase 230 V. ## Speed, torque, and the supply-class envelope Nominal speed tracks the supply: 4000 rpm at 230 V single-phase, 8000 rpm at 400 V three-phase, and 9000 rpm at 480 V three-phase — paired with nominal torque of 0.75 N.m on the single-phase feed and 0.63 N.m on both three-phase feeds. In plain terms, the same winding delivers more speed headroom on three-phase but trades roughly 16 % of nominal torque to get there. Peak stall torque is 2.5 N.m across the 115–480 V three-phase window, against a continuous stall torque of 0.71 N.m and continuous stall current of 1.2 A — so the motor has roughly 3.5× of stall torque available in transient bursts, bounded by the 4.8 A Irms peak ceiling. Maximum mechanical speed is 9000 rpm with a torque constant of 0.59 N.m/A at 120 °C and a back-EMF constant of 40 V/krpm at 20 °C — the back-EMF figure is what limits how close to top speed a 480 V drive can push the winding before the bus voltage runs out of headroom. ## Feedback, connector, and the IP65 / IP54 split Encoder type is the absolute single-turn Hiperface DSL — a one-cable feedback+digital interface that runs through a single quick-lock rotatable right-angled connector, so the cabinet-side wiring is just one hybrid lead back to the drive. IP degree of protection splits: IP65 on the motor body, IP54 on the shaft bushing when no shaft seal ring is fitted — which is the SH30552P0AA4000 configuration. The shaft bushing IP rating is the gap a junior on the floor needs to hear twice: dust and water spray hit the housing, but the shaft exit is the weaker point, and the seal ring upgrade is a separate order. ## No holding brake on this build Holding brake is listed as without, so the SH30552P0AA4000 ships without an internal fail-safe brake — a vertical axis that needs gravity-hold must source the brake externally or move to a braked variant in the same frame. ## Mounting, shaft, and the load-side envelope Mounting support is the international standard flange with a 40 mm centring collar at 2 mm depth and four 5.5 mm mounting holes, mating a smooth 9 mm shaft at 20 mm length — the bolt pattern is what lets the SH30552P0AA4000 drop onto common NEMA-style and IEC-style adapter plates without a custom bracket. Shaft load limits are 370 N radial at 1000 rpm and 40 N axial, with natural convection cooling and a 130 °C copper-hot thermal ceiling — so the continuous rating assumes still air, no shroud, and no heat-soaked coupling housing pushing the bearing temperature the wrong way.","metaTitle":"Schneider Electric SH30552P0AA4000 SH3 servo, 530 W","metaDescription":"Schneider Electric SH30552P0AA4000 SH3 servo motor, 530 W continuous, 0.75 N.m nominal at 230 V single-phase, Hiperface DSL encoder, 55 mm flange.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0AA4000","Length":"154.5 mm","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.5 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"370 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/15b6a62028223911d7d46efe62ac86f4.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0AA4000/sh3-servomotor-55mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What is SH30552P0AA4000's listed length on this Servo Motors with Brake line?","answer":"Listed length is 154.5 mm on the SH30552P0AA4000, paired with 1.5 kg product weight and the 55 mm flange footprint — so it lands as the short-body SH3 build rather than the longer-coupled variants in the same frame."},{"question":"What is SH30552P0AA4000's listed inertia on this Servo Motors with Brake line?","answer":"Rotor inertia is 0.096 kg.cm² on the motor, with no brake inertia contribution — the SH30552P0AA4000 ships without a holding brake, so the brake inertia column reads 0 against the 0.096 kg.cm² motor figure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}