{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0AA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0AA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0AA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0AA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30552P0AA4100 SH3 brushless servo motor, 55 mm flange, 0.63 N·m nominal torque, 530 W continuous, Hiperface DSL absolute single-turn encoder, IP65.","salesMarkdown":"## Sizing the SH3 for the load Schneider Electric SH30552P0AA4100 is a SH3-series brushless AC servo motor with a 55 mm international-standard flange, 9 mm smooth shaft, and 154.5 mm body length (cites:, cites:, cites:). The torque envelope runs 0.75 N·m on 230 V single-phase and 0.63 N·m on 400 V three-phase / 480 V three-phase, with peak stall torque 2.5 N·m from 115 V to 480 V three-phase (cites:, cites:). Continuous output power is 530 W at 400 V and 480 V three-phase (280 W at 230 V single-phase), and continuous stall torque sits at 0.71 N·m across the three-phase range (cites:, cites:). So the part delivers roughly 530 W of mechanical shaft power at 8000–9000 rpm three-phase, but the same torque at single-phase input costs you 250 W of headroom — drive sizing on a 230 V single-phase supply has to respect the lower continuous rating, not the headline three-phase figure. ## Feedback, connector, and brake disposition Feedback is an absolute single-turn Hiperface DSL encoder — single-cable interface, no battery, absolute position retained on power cycle (cites:). The power/feedback connector is a rotatable right-angle quicklock — useful when the cabinet layout forces the cable to drop along the motor body instead of straight out the back (cites:). ## Thermal envelope, IP rating, and mechanical limits Cooling is natural convection; the stator is rated to 130 °C copper-hot, with the torque constant specified at 0.59 N·m/A at 120 °C — derate from the nominal figure when the motor is enclosed with no forced airflow (cites:, cites:, cites:). IP65 on both the motor body and the shaft bushing per IEC 60034-5 — the seal holds up against coolant splash and washdown, but the shaft seal is the wear surface that determines field service intervals (cites:). Shaft load limits are 190 N radial at 8000 rpm and 40 N axial; maximum mechanical speed 9000 rpm; 4 × 5.5 mm mounting holes on a 40 mm centring collar (cites:, cites:, cites:, cites:, cites:, cites:). Maximum current Irms is 4.8 A with a 3 s peak of the same — the drive's peak-current window must be set at or below 4.8 A or the demag envelope closes in fast (cites:, cites:). ## Sourcing posture for the BOM line For a multi-axis build, hold the same shaft and flange geometry across the line — the SH3 55 mm frame is the easiest fit next to a Lexium 32 / Lexium 52 drive, and the single-cable Hiperface DSL connector drops one cable per axis off the cabinet build (cites:, cites:).","metaTitle":"Schneider Electric SH30552P0AA4100 Servo Motor, 0.63 N·m","metaDescription":"Schneider Electric SH30552P0AA4100 SH3 servo motor, 55 mm flange, 0.63 N·m nominal torque at 530 W, Hiperface DSL feedback, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0AA4100","Length":"154.5 mm","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.5 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6b8b083ec1ff8645fed8b0355ebdb122.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0AA4100/sh3-servomotor-55mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"What is the listed length and flange of SH30552P0AA4100?","answer":"Body length is 154.5 mm on a 55 mm international-standard flange with a 9 mm smooth shaft (cites:, cites:, cites:). Drop-in for any SH3 55 mm frame machine cavity that the BOM already calls out."},{"question":"What is the rotor inertia of SH30552P0AA4100?","answer":"Rotor inertia is 0.096 kg·cm² for the motor; the brake inertia slot reads 0.0 kg·cm² because this code ships without a holding brake (cites:, cites:, cites:). Match the load inertia to the motor at no more than roughly 10× for clean following error on a point-to-point axis."},{"question":"Does SH30552P0AA4100 carry a holding brake?","answer":"No — this order code is listed without a holding brake (cites:). If the axis needs a fail-safe brake, pick the brake-equipped variant of the SH30552P sizing reference rather than retrofitting one to this code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0AA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0AA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}