{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0AF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0AF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0AF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0AF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH30552P0AF4000 servo motor with holding brake, 55 mm flange, 530 W continuous, 4000 rpm nominal at 230 V single phase, Hiperface DSL absolute single-turn encoder, IEC flange mount.","salesMarkdown":"## What the SH30552P0AF4000 actually delivers on the shaft The Schneider Electric SH30552P0AF4000 is a SH3-series servo motor with holding brake built on a 55 mm international-standard flange, sized for 530 W of continuous mechanical output and 0.75 N.m of nominal torque at 230 V single phase. That continuous rating is the number to size the application against — not the peak stall torque of 2.5 N.m at 115...480 V three phase, which is only available as a transient overload. Nominal speed scales with the supply: 4000 rpm at 230 V single phase, 8000 rpm at 400 V three phase, and 9000 rpm at 480 V three phase, with the 9000 rpm ceiling also the maximum mechanical speed the bearings and balance are rated for. ## Torque, current, and thermal envelope The torque constant of 0.59 N.m/A at 120 °C winding temperature is the conversion factor between commanded current and shaft torque, and the 4.8 A Irms peak / 4.8 A 3-second peak output current are the same ceiling the drive must respect on acceleration ramps. Cooling is natural convection only, so any enclosure that traps heat around the motor body will erode that continuous figure — derate against the IEC 60034 thermal class rather than assuming the nameplate in still air transfers cleanly into a sealed cabinet. ## Encoder, brake, and electrical interface Feedback is an absolute single-turn Hiperface DSL encoder on a quicklock rotatable right-angled connector — single-cable topology, so only one hybrid cable runs between drive and motor rather than separate power and resolver/encoder pairs. ## Mechanical limits the mechanical designer has to respect The shaft sees a maximum radial force of 190 N at 8000 rpm and a maximum axial force of 40 N — the numbers a belt drive, pinion, or coupling has to be checked against, with the radial figure derating as speed rises. Sealing is IP65 on the motor body and IP54 at the shaft bushing when no shaft seal ring is fitted, per IEC 60034-5 — adequate for typical machine interiors, not for direct washdown or outdoor exposure where the IP54 shaft end would be the weak link. Mounting is via the international standard flange with 5.5 mm mounting holes on the 55 mm bolt circle, and the stator electrical data of 17.4 Ohm phase resistance and 18.2 mH phase inductance is what the drive's auto-commissioning routine will read back during first-time setup.","metaTitle":"Schneider SH30552P0AF4000 SH3 servo, 55 mm, 530 W","metaDescription":"Schneider Electric SH30552P0AF4000 SH3 servo motor with brake, 55 mm flange, 0.75 N.m nominal, 530 W, Hiperface DSL, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0AF4000","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Singleturn DSL 18bit, Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/711988aacd2358870f63fe88e0f5c5a3.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0AF4000/sh3-servomotor-55mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH30552P0AF4000 in this Servo Motors with Brake family?","answer":"Within the SH3 55 mm frame, SH30552P0AF4000 is itself the sizing reference SH30552P, so any drop-in alternative has to match the 55 mm flange, the 9 mm smooth shaft, the Hiperface DSL encoder, and the brake — no separate cross-reference order code is listed in the record. If a non-SH3 alternative is being considered, expect a different bolt circle, encoder protocol, or cable harness rather than a clean swap."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0AF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0AF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}