{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0AF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0AF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0AF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0AF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH30552P0AF4100 servo motor with holding brake, 0.75 N.m nominal torque, 530 W continuous power, Hiperface DSL absolute encoder, 55 mm flange, IP65.","salesMarkdown":"## Form factor and mechanical fit The SH30552P0AF4100: The output end is a smooth 9 mm shaft, 20 mm long, with a maximum mechanical speed of 9000 rpm and radial load capacity of 190 N at 8000 rpm — adequate for direct coupling to a precision gearbox or a small pinion without exceeding bearing life in normal indexing duty. ## Torque, speed and power envelope Nominal torque is 0.75 N.m when driven from a 230 V single-phase supply and 0.63 N.m on 400 V or 480 V three-phase, with a continuous output power of 530 W on the three-phase rails — meaning the same motor frame works from a single-phase pack machine tool up to a 480 V industrial line, just with different torque headroom. Nominal speed climbs from 4000 rpm at 230 V single-phase to 8000 rpm at 400 V and 9000 rpm at 480 V, so on a 480 V bus the shaft reaches the 9000 rpm ceiling before the torque curve rolls off — that headroom matters for high-throughput indexing where dwell time has to be short. Peak stall torque is 2.5 N.m across 115 V to 480 V three-phase, with a maximum Irms of 4.8 A and a 3-second peak output current also rated at 4.8 A — the 3.3× nominal torque margin is what carries acceleration transients through the cycle budget. Continuous stall torque settles at 0.71 N.m with a continuous stall current of 1.2 A, and the torque constant of 0.59 N.m/A at 120 °C is the figure to use when sizing the drive's current loop — it is the thermal-derated value, not the cold-reading. ## Brake, inertia and load handling The integrated holding brake delivers 0.8 N.m of holding torque with a 10 W pull-in coil, suited to vertical-axis hold when the bus drops — it is sized for static retention, not for dynamic stopping, so emergency-stop braking still has to come from the drive's regenerative path or an external clamp. Maximum radial force is 190 N at 8000 rpm and maximum axial force 40 N, both derated from the bearing curve — a small belt or pinion drive stays inside the envelope; a heavy chain or coupling reaction load needs a separate check. ## Feedback, wiring and environmental rating Feedback is an Absolute single-turn Hiperface DSL encoder on a 3-pole motor — the single-cable DSL link cuts the cable count to one rotatable quick-lock right-angle connector at the motor housing, which is what keeps the cable bend radius manageable in tight gantry routings. Cooling is natural convection with an IP65 rating on both the motor body and shaft bushing per IEC 60034-5, so the SH30552P0AF4100 handles splash and dust ingress typical of a washdown-adjacent conveyor cell without a forced-air kit. Stator resistance is 17.4 Ohm and stator inductance 18.2 mH, with a back-EMF constant of 40 V/krpm at 20 °C — those are the values the drive's current-loop bandwidth calculation wants, not the cold-resistance figure from a bench meter.","metaTitle":"Schneider SH30552P0AF4100 Servo Motor, Brake, 0.75 N.m","metaDescription":"Schneider Electric SH30552P0AF4100 SH3 servo motor with brake, 0.75 N.m nominal torque, 530 W, Hiperface DSL encoder, IP65. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0AF4100","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Singleturn DSL 18bit, Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5efa5630008090b6fd0d8215df987144.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0AF4100/sh3-servomotor-55mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"What is SH30552P0AF4100's listed length and how does it affect cell layout?","answer":"Body length is 181 mm at 1.65 kg with a 55 mm flange, so it fits the compact-cell envelope typical of SH3-family designs without extending the reach envelope or pushing the payload budget."},{"question":"What is the rotor and brake inertia on SH30552P0AF4100?","answer":"Rotor inertia is 0.117 kg.cm² and the brake stack adds 0.021 kg.cm² (motor-only contribution 0.096 kg.cm²) — values to feed into the drive's autotune so the acceleration profile lines up with the cycle budget."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0AF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0AF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}