{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0BA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0BA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0BA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0BA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P0BA4100, 55 mm flange, 530 W continuous, 0.75 N.m nominal, Hiperface DSL multiturn encoder, IP65.","salesMarkdown":"## What the SH3 55 mm frame actually delivers at the shaft The SH30552P0BA4100: Nominal torque lands at 0.75 N.m on single-phase 230 V and drops to 0.63 N.m on the three-phase 400 V and 480 V rails; peak stall torque is 2.5 N.m with a 4.8 A Irms ceiling, so the motor has roughly 3.3× torque headroom for acceleration and impact loads before the drive current-limits. ## Encoder, brake, and shaft — the configuration this code commits you to Encoder is an absolute multiturn Hiperface DSL on a single cable link, so position is retained through power cycles and only one hybrid connector runs from the motor back to the drive — fewer cables in the cable track than the older resolver-plus-encoder dual-cable schemes. Holding brake is listed as without — this code ships as a non-braked servo. Vertical-axis applications that need a fail-safe holding torque must add an external mechanical brake or specify the braked variant in the same frame. ## Electrical envelope — constants the drive has to match Back-EMF constant is 40 V/krpm at 20 °C and torque constant is 0.59 N.m/A at 120 °C — the drive's bus voltage and current loop have to be sized off these two numbers, not the headline wattage, because they set the no-load speed and the amps-per-N.m the controller actually commands. Stator resistance is 17.4 Ohm and inductance 18.2 mH; continuous stall current is 1.2 A and 3-second peak output current matches the 4.8 A Irms ceiling, so the servo drive must support the same 3-phase architecture and a current-loop bandwidth capable of the 3 s peak duty without I²T trip. Maximum mechanical speed is 9000 rpm and nominal speed reaches 8000 rpm at 400 V three-phase and 9000 rpm at 480 V three-phase, with a lower 4000 rpm ceiling on 230 V single-phase — the field-weakening range above base speed is short, so applications targeting sustained high-rpm duty need the 480 V supply. ## Mounting, shaft loads, and what fits on the panel Mounting is a 55 mm international-standard flange with four 5.5 mm holes on a 40 mm centring collar, 2 mm deep — a standard servo-footprint pattern that bolts directly to most gearhead and planetary input flanges in this size class. Maximum radial shaft load is 660 N at 1000 rpm and maximum axial load is 80 N — adequate for small pinions and direct-couple belt drives but a belt drive with significant overhung load needs the load point checked against the speed-squared derating curve before committing.","metaTitle":"Schneider SH30552P0BA4100 Servo Motor, 530 W, IP65","metaDescription":"Schneider Electric SH30552P0BA4100 SH3 servo motor, 55 mm flange, 0.75 N.m nominal, 530 W, Hiperface DSL encoder. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0BA4100","Length":"154.5 mm","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.5 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8c85432d2c5da57da7d244bdd18fb8b8.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0BA4100/sh3-servomotor-55mm-2-stacks-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"Who supplies the SH30552P0BA4100 and how is it quoted for volume purchases?","answer":"Sourced through independent industrial-automation distribution, quoted to order against the BOM line."},{"question":"What is the SH30552P0BA4100's listed length?","answer":"The motor body length is 154.5 mm, with a 55 mm flange and a 20 mm shaft projection."},{"question":"What is the SH30552P0BA4100's listed rotor inertia?","answer":"Rotor inertia is 0.096 kg.cm²; the brake inertia entry reads 0.0 kg.cm² because this code ships without a holding brake."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0BA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0BA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}