{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0BF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0BF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0BF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0BF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, SH3 series, servo motor with holding brake and absolute multiturn Hiperface DSL encoder, 530 W continuous, 0.75 N.m nominal torque, 4000 rpm at 230 V single phase, 55 mm flange, IP65, quicklock connector.","salesMarkdown":"## SH3 servo motor — 55 mm flange, Hiperface DSL feedback, holding brake Schneider Electric SH30552P0BF4000 is a brushless AC servo motor from the SH3 line, with a 55 mm international-standard flange, smooth 9 mm shaft, and an integrated holding brake; feedback is an absolute multiturn Hiperface DSL encoder (cites:,). Hiperface DSL is a single-cable digital protocol — the encoder rides on the power cable rather than needing a separate feedback line, which simplifies cabinet routing on a high-pole-count servo and keeps the panel-side terminations to one quicklock connector (cites:,). ## Torque, speed and power envelope Continuous mechanical output is 530 W at 400 V three-phase and 480 V three-phase, dropping to 280 W at 230 V single phase — the three-phase rails are where the motor earns its nominal rating, and the single-phase rating exists for installations where only 230 V is available (cites:,). Nominal torque is 0.75 N.m at 230 V single phase, 0.63 N.m at 400 V three phase and 0.63 N.m at 480 V three phase; peak stall torque reaches 2.5 N.m across 115 to 480 V three phase for short transient acceleration pulses (cites:,). Nominal speed scales with the supply: 4000 rpm at 230 V single phase, 8000 rpm at 400 V three phase, 9000 rpm at 480 V three phase, with a maximum mechanical speed ceiling of 9000 rpm and continuous stall current of 1.2 A — the drive must be configured to honour the field-weakening boundary above 8000 rpm (cites:,). Holding brake is rated 0.8 N.m with 10 W pull-in power, suitable for vertical-axis parking and controlled E-stop holds without oversizing the drive's brake output stage (cites:,). ## Electrical constants for the velocity loop Torque constant is 0.59 N.m/A at 120 °C winding temperature and back-EMF constant 40 V/krpm at 20 °C, which together let the drive's current loop resolve torque demand directly from the Iq command without thermal compensation drift across the working range (cites:,). Stator resistance 17.4 Ohm and stator inductance 18.2 mH define the electrical time constant — a relatively high-resistance, moderate-inductance winding means the current loop settles quickly and the drive can push the velocity-loop bandwidth without fighting sluggish field build-up (cites:,). ## Mounting, environment and connector Mounting is via an international-standard flange with 5.5 mm bolt holes, a 40 mm centring collar 2 mm deep, and a smooth 20 mm shaft — the standard flange pattern drops straight onto the typical 55 mm gearbox input or machine-side adapter without a custom bracket (cites:,). Environmental rating is IP65 on the motor body and IP54 at the shaft bushing without a shaft seal ring, per IEC 60034-5 — the housing tolerates washdown and dust-laden cabinet environments, but the shaft exit is the weak point and a seal ring is the right choice for wet-side food-and-bev or outdoor mounting (cites:). Cooling is natural convection only, so the motor needs clearance around the body and cannot be shrouded against a heat-sunk structure; maximum axial force is 40 N and maximum radial force is 190 N at 8000 rpm, which sets the coupling selection and any belt-drive geometry (cites:,). Electrical connection is a right-angled rotatable quicklock connector — rotating the head lets the cable exit in any of four directions, which simplifies routing in shallow cabinets where the bend radius would otherwise fight a fixed orientation (cites:).","metaTitle":"Schneider SH30552P0BF4000 Servo Motor 530 W, 4000 rpm, IP65","metaDescription":"Schneider Electric SH30552P0BF4000 SH3 servo motor, 530 W continuous, 4000 rpm nominal, 0.8 N.m holding brake, IP65. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0BF4000","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7883c0ad8b96072a8f8865b52146dea4.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0BF4000/sh3-servomotor-55mm-2-stacks-smooth-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0BF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0BF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}