{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P0BF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P0BF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P0BF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P0BF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, 530 W continuous, 0.75 N.m nominal, with holding brake and Hiperface DSL encoder, 9 mm smooth shaft, IP65, SH30552P0BF4100.","salesMarkdown":"## Matching the motor to the drive and the load The SH30552P0BF4100 is a SH3-series servo motor with integrated holding brake, sized at 530 W continuous output at 400 V three-phase and 280 W at 230 V single-phase — the supply rails on the drive side are the first decision point, because nominal torque drops from 0.75 N.m at 230 V single-phase to 0.63 N.m at 400 V and 480 V three-phase. Peak stall torque is 2.5 N.m across 115...480 V three-phase, with continuous stall torque at 0.71 N.m over the same envelope — the 3.5× short-term headroom covers the acceleration step on a packaging or pick-and-place axis without oversizing the motor. ## Feedback, brake, and the shaft-side interface Feedback is absolute multiturn Hiperface DSL over the single-cable connector — a rotatable right-angled quicklock plug at the motor body — so the resolver or incremental option cannot be substituted without rewiring the drive-side encoder port. The integrated holding brake delivers 0.8 N.m holding torque with 10 W pull-in power, sized for vertical-axis static hold on a stopped machine — engagement and release timing belong in the drive's brake-control output, not the safety circuit. Shaft is 9 mm diameter, 20 mm length, smooth (no keyway) — a keyed coupling is the integrator's call, and the maximum radial load is 660 N at 1000 rpm with a maximum axial load of 80 N, both of which fall off with speed and must be checked against the driven element's overhung load. ## Electrical constants and thermal envelope Stator resistance is 17.4 Ohm with 18.2 mH inductance — the relatively high resistance reflects the low-inertia winding, and the torque constant is 0.59 N.m/A at 120 °C with a back-EMF constant of 40 V/krpm at 20 °C, so the drive's current loop and bus voltage must be sized to the 9000 rpm maximum mechanical speed. Continuous stall current is 1.2 A against a 4.8 A peak Irms and 4.8 A 3-second peak output — the drive's continuous current rating sits above 1.2 A or the motor will not reach its listed torque without current-limit tripping in stall. ## Mounting and environmental rating IP65 on the motor body and the shaft bushing per IEC 60034-5 — sealed against directed water jets and dust, suitable for washdown-adjacent areas in food and beverage lines but not for full submergence; the connector O-ring is the wet-end barrier and must seat fully on install. ## Sourcing posture Lifecycle status reads current in the catalog record — produced under the SH30552P sizing reference inside the SH3 family, with no declared successor on the line; sourcing is quoted against the BOM with current pricing and lead time confirmed at RFQ rather than carried as stocked inventory.","metaTitle":"Schneider SH30552P0BF4100 Servo Motor, 530 W, with Brake","metaDescription":"Schneider SH30552P0BF4100 SH3 servo motor with brake, 0.75 N.m nominal, Hiperface DSL encoder, IP65. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P0BF4100","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 2 stacks, smooth Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ef43ed2c9ad67c3128cc2685f1a1ebc5.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P0BF4100/sh3-servomotor-55mm-2-stacks-smooth-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"What is the SH30552P0BF4100's listed length on this servo motor line?","answer":"Length is 181 mm, with product weight 1.65 kg — both figures are off the same SH30552 frame, so any variant in this size class shares the same envelope."},{"question":"What is the rotor and brake inertia on the SH30552P0BF4100?","answer":"Total rotor inertia is 0.117 kg.cm², split between the brake at 0.021 kg.cm² and the motor itself at 0.096 kg.cm² — the brake plate accounts for roughly 18% of the rotating mass, which is non-trivial on a high-acceleration profile."},{"question":"Can a non-DSL encoder motor substitute for the SH30552P0BF4100?","answer":"No drop-in substitute is recorded for this servo motor family — the SH30552P0BF4100 ships with absolute multiturn Hiperface DSL feedback over the single-cable connector, and a resolver or incremental variant would not match the drive-side encoder port or the electrical-connection keying."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P0BF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P0BF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}