{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P11A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P11A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P11A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P11A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P11A2100, three-phase, 530 W continuous power, 6000 rpm, 0.63 Nm nominal torque at 400 V, IP65, absolute single-turn SinCos Hiperface encoder, natural convection cooling.","salesMarkdown":"## Speed-torque curves that follow the supply The SH30552P11A2100 delivers 6000 rpm at both 400 V three-phase and 480 V three-phase supplies, with nominal torque of 0.63 Nm at those voltages. On 115 V single-phase the motor tops out at 2000 rpm with 0.77 Nm; on 230 V single-phase it reaches 4000 rpm at 0.75 Nm. The continuous power rating is 530 W, but the nominal output power varies by supply: 160 W at 115 V single-phase, 310 W at 230 V single-phase, 600 W at 400 V three-phase, and 670 W at 480 V three-phase. This means the motor's usable torque and speed are supply-dependent — a 480 V three-phase line gives the highest power and speed, while a 115 V single-phase line limits both. The peak stall torque is 2.5 Nm across the 115–480 V three-phase range, and the continuous stall torque is 0.71 Nm over the same span. ## Mounting and shaft fit The motor uses an international standard flange with a 55 mm flange size and a 40 mm centring collar. The shaft is 9 mm diameter, 20 mm long, with a parallel key and a 3 mm key width. Mounting hole diameter is 5.5 mm, and the centring collar depth is 2 mm. The electrical connection is a rotatable right-angled connector — useful for tight cable routing in panels or machine frames. The motor is cooled by natural convection, so no external fan or forced air is needed, but the ambient temperature around the motor must stay within the copper hot limit of 130 °C.","metaTitle":"Schneider Electric SH30552P11A2100 Servo Motor, 6000 rpm","metaDescription":"Schneider Electric SH30552P11A2100 SH3 servo motor, 530 W continuous, 6000 rpm, 0.63 Nm nominal torque at 400 V three-phase, IP65, absolute single-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.08 in (154.4 mm)","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.1 in (3 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cd79b44b751a3de10f9703e266f668f6.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30552P11A2100/sh3-servomotor-55mm-2-stacks-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30552P11A2100/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P11A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P11A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}