{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30552P11F2000, three-phase, 530 W continuous power, 0.8 N.m holding torque, IP65 motor, absolute single-turn SinCos Hiperface encoder, 55 mm flange.","salesMarkdown":"The SH30552P11F2000: Sourcing is straightforward: we quote this against your BOM quantity through authorized supply. ## Speed and torque — voltage-dependent performance map This motor's nominal speed depends entirely on what supply voltage you feed it. At 115 V single-phase it spins 2000 rpm; at 230 V single-phase it reaches 4000 rpm; on a three-phase supply (400 V or 480 V) it tops out at 8000 rpm. So the same motor covers both low-speed and high-speed machine axes — just match the drive voltage to the target speed. Nominal torque also shifts with voltage. At 115 V single-phase you get 0.77 N.m; at 230 V single-phase it's 0.75 N.m; on three-phase (400 V or 480 V) it settles at 0.63 N.m. The holding brake delivers 0.8 N.m regardless of supply — that's the torque that holds the load when power is off. Continuous power is 530 W, but nominal output power varies: 160 W on 115 V single-phase, 310 W on 230 V single-phase, 600 W on 400 V three-phase, and 670 W on 480 V three-phase. The 530 W continuous rating is the thermal limit under natural convection cooling — stay under it for sustained duty. ## Encoder, brake, and IP rating — what you get in the package The encoder is an absolute single-turn SinCos Hiperface type — no homing sequence needed on power-up; the position is known immediately. That saves a home-prox sensor and the wiring for it. IP rating is split: the motor body is IP65, so it handles washdown spray. The shaft bushing without a shaft seal ring is IP54 — that's splash-protected but not jet-proof. If the application sees direct water on the shaft exit, add an external seal or specify the IP65 shaft bushing option. ## Mounting and connection — flange size and rotatable connector The motor flange is 55 mm (2.2 in), conforming to the international standard flange pattern. Four mounting holes on a 5.5 mm diameter, centring collar 40 mm diameter and 2 mm deep — standard dimensions that fit most servo gearboxes and mounting brackets. Electrical connection is a rotatable right-angled connector — you can orient the cable exit in the direction that keeps the cable tray clean. No need for a separate right-angle adapter or a cable strain-relief bracket. Shaft is 9 mm diameter with a parallel key, 20 mm shaft length, 3 mm key width. The shaft end is parallel key — standard for positive drive coupling without set-screw slippage. ## Thermal and electrical limits — what the windings can take Stator resistance is 17.4 Ω and stator inductance is 18.2 mH — these set the electrical time constant and influence how the drive's current loop tunes. The torque constant is 0.59 N.m/A at 120 °C copper temperature; the back EMF constant is 40 V/krpm at 20 °C. Both matter when sizing the drive's voltage and current headroom. Maximum continuous current (Irms) is 4.8 A; the 3-second peak current is also 4.8 A — so this motor doesn't have a significant overload margin beyond its continuous rating. Peak stall torque is 2.5 N.m across the 115...480 V three-phase range; continuous stall torque is 0.71 N.m. The hot-spot copper temperature limit is 130 °C — the drive's thermal model should respect this. ## Radial and axial load limits — bearing life planning Maximum radial force at the shaft nose drops with speed: 370 N at 1000 rpm, 290 N at 2000 rpm, 260 N at 3000 rpm, 230 N at 4000 rpm, 220 N at 5000 rpm, 200 N at 6000 rpm, and 190 N at 7000 and 8000 rpm. Maximum axial force is 40 N. These are the limits for standard bearing life — belt drives or direct-coupled loads that exceed these will shorten bearing life.","metaTitle":"Schneider Electric SH30552P11F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30552P11F2000 SH3 servo motor with brake, 530 W continuous power, 0.8 N.m holding torque, IP65 motor, absolute single-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30552P11F2000","Length":"7.1 in (181 mm)","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"0.1 in (3 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"With","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 8000 rpm 400 V three phase 8000 rpm 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"7.08 lbf.in (0.8 N.m)","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0d358eec21823392078971f0de8dde5f.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30552P11F2000/sh3-servomotor-55mm-2-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What encoder type does the SH30552P11F2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. No homing cycle needed on power-up — the position is known immediately, which simplifies commissioning and eliminates the home-prox sensor."},{"question":"What is the IP rating of the SH30552P11F2000 motor?","answer":"The motor body is IP65, suitable for washdown environments. The shaft bushing without a shaft seal ring is IP54 — splash-protected but not jet-proof. For direct water exposure at the shaft exit, an external seal or the IP65 shaft bushing option is recommended."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}