{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P11F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P11F2100, three-phase, 530 W continuous power, 6000 rpm at 400 V, with holding brake, absolute single-turn SinCos Hiperface encoder, IP65, 55 mm flange.","salesMarkdown":"## Motor ratings and supply-dependent performance The SH30552P11F2100 is a three-phase servo motor from the Schneider SH3 family, rated for 530 W continuous power. Its nominal speed and torque shift with the supply voltage: at 400 V three-phase it delivers 6000 rpm and 0.63 N.m nominal torque; at 480 V three-phase the same 6000 rpm speed with 0.63 N.m nominal torque and 670 W nominal output power. Peak stall torque reaches 2.5 N.m across the 115–480 V three-phase range, giving short-term overload headroom for acceleration or load transients. Continuous stall torque is 0.71 N.m at the same supply range. ## Feedback, mounting, and environmental fit Encoder type is absolute single-turn SinCos Hiperface — a digital/analogue hybrid feedback that reports absolute position within one revolution at power-up, no homing sequence needed. The drive must support Hiperface protocol; this is common on Lexium and other servo drives that accept SinCos encoders. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 means it withstands dust ingress and low-pressure water jets — suitable for washdown areas or dusty production floors. Cooling is by natural convection; no external fan or coolant circuit required. ## Electrical connection and sourcing posture The electrical connection uses a rotatable right-angled connector — the cable exit angle can be adjusted in the field to suit tight cable-tray routing or panel entry. Stator resistance is 17.4 Ohm and stator inductance is 53.54 mH, which the drive tuning algorithm uses for current-loop gains.","metaTitle":"Schneider Electric SH30552P11F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30552P11F2100 SH3 servo motor, 530 W continuous, 6000 rpm at 400 V three-phase, with holding brake and absolute single-turn Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Length":"7.1 in (181 mm)","Product Status":"Active","Shaft Diameter":"0.4 in (9 mm)","Shaft End Type":"Parallel key","Max Axial Force Fa N":"40 N","Max Radial Force Fr N":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Centring Collar Diameter":"1.6 in (40 mm)","Main Product Or Component Type":"Servo motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/73847deb7bdaeeef64360b7d1db8174b.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30552P11F2100/sh3-servomotor-55mm-2-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30552P11F2100/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}