{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P12A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P12A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P12A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P12A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P12A2100, 530 W continuous power, 55 mm flange size, three-phase, IP65, absolute multiturn SinCos Hiperface encoder, without holding brake.","salesMarkdown":"## 530 W SH3 servo with 55 mm flange — three-phase duty across the speed range The SH30552P12A2100 is a Schneider Electric SH3 series servo motor delivering 530 W continuous power from a 55 mm international standard flange. It is a three-phase motor whose torque-speed envelope depends on the supply: nominal torque is 0.77 N·m at 2000 rpm on 115 V single phase, 0.75 N·m at 4000 rpm on 230 V single phase, and 0.63 N·m at 6000 rpm on 400 V or 480 V three phase. The motor is fitted with an absolute multiturn SinCos Hiperface encoder — a single-turn and multi-turn position feedback that retains position through power cycles, eliminating the need for a homing routine on each power-up. This makes it a natural fit for axes where the controller must know the absolute position immediately after a restart. ## IP65 enclosure and radial load limits by speed Cooling is by natural convection, so the thermal budget depends on free airflow around the flange. The maximum permissible radial force drops with speed: 370 N at 1000 rpm, 290 N at 2000 rpm, 260 N at 3000 rpm, 230 N at 4000 rpm, 220 N at 5000 rpm, 200 N at 6000 rpm, and 190 N at 7000 and 8000 rpm. Maximum axial force is 40 N. These limits govern belt-drive or direct-coupling applications — exceeding them at the operating speed accelerates bearing wear. The shaft end carries a parallel key (key width 3 mm, shaft diameter 9 mm, shaft length 20 mm). The electrical connection is a rotatable right-angled connector, which helps route the cable in tight cabinet spaces.","metaTitle":"Schneider Electric SH30552P12A2100 Servo Motor, 530 W","metaDescription":"Schneider Electric SH30552P12A2100 servo motor, 530 W continuous power, 55 mm flange, IP65, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30552P12A2100","Length":"6.08 in (154.4 mm)","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.1 in (3 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"6.82 lbf.in (0.77 N.m) 115 V single phase 6.64 lbf.in (0.75 N.m) 230 V single phase 5.58 lbf.in (0.63 N.m) 400 V three phase 5.58 lbf.in (0.63 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.59 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting Support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"22.1 lbf.in (2.5 N.m) 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"160 W 115 V single phase 310 W 230 V single phase 600 W 400 V three phase 670 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"6.28 lbf.in (0.71 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fcc6bf4bdec149e501f0bce5c59b4a43.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30552P12A2100/sh3-servomotor-55mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the SH30552P12A2100's continuous torque at different supply voltages?","answer":"Continuous stall torque is 0.71 N·m across the 115 to 480 V three-phase range. At rated speed, nominal torque is 0.77 N·m at 2000 rpm on 115 V single phase, 0.75 N·m at 4000 rpm on 230 V single phase, and 0.63 N·m at 6000 rpm on 400 V or 480 V three phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P12A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P12A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}