{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P1AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P1AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P1AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P1AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30552P1AA4000, 55 mm flange, 530 W continuous, 0.75 N.m nominal at 230 V single phase, Hiperface DSL absolute single-turn encoder, IP65, international standard flange mount.","salesMarkdown":"## Definition and primary use The SH30552P1AA4000: It is built for positioning and synchronism duty on machines where the motor is flange-mounted to a gearbox or lead-screw coupling: natural convection cooling, IP65 sealing on the motor body, and an international standard flange with a parallel key shaft end make it suited to panel-integration layouts rather than open-frame field mounting. ## Ratings across the supply envelope Duty is supply-dependent: 0.75 N.m nominal torque at 230 V single phase running to 4000 rpm, dropping to 0.63 N.m at 400 V three phase or 480 V three phase where nominal speed rises to 8000 rpm and 9000 rpm respectively — the headline 530 W continuous output only holds on the three-phase 400 V and 480 V rails. Peak stall torque is 2.5 N.m across the full 115 V to 480 V three-phase range, with a continuous stall torque of 0.71 N.m — the figure that should govern sizing for a stationary loaded axis rather than the higher peak number. ## Drive-side electrical constants Stator resistance is 17.4 Ohm with 18.2 mH inductance and a torque constant of 0.59 N.m/A at 120 °C — the latter is the figure that lets the drive translate commanded current into mechanical torque once the thermal derating curve is applied. Continuous stall current is 1.2 A; 3-second peak output current is 4.8 A and maximum Irms is 4.8 A — the drive's current-limit profile must respect the 1.2 A continuous figure rather than the peak number for any dwell load. ## Mechanical envelope and forces on the shaft Shaft is 9 mm diameter with a 3 mm parallel key, 20 mm usable length, and maximum mechanical speed 9000 rpm; radial force limit is 370 N at 1000 rpm (derating applies above that point) and maximum axial force Fa is 40 N. Flange mounting uses an international standard pattern with 5.5 mm mounting holes and a 40 mm centring collar 2 mm deep — a direct flange match to standard planetary gearboxes in the SH3 sizing bracket. ## Sourcing posture SH30552P1AA4000 is sourced through independent distribution against a quoted RFQ; current production pricing and availability are confirmed at quote time. The encoder (Hiperface DSL) is integrated into the motor body, so the mating cable set is ordered separately against the drive model on the BOM line.","metaTitle":"Schneider SH30552P1AA4000 Servo Motor, 530 W, Hiperface DSL","metaDescription":"Schneider SH30552P1AA4000 SH3 servo motor, 530 W continuous, 4000 rpm nominal at 230 V single phase, IP65, Hiperface DSL absolute single-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P1AA4000","Length":"154.5 mm","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.5 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"370 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5e609e4bae0b424632187f6bda3c3856.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P1AA4000/sh3-servomotor-55mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What is SH30552P1AA4000's listed length (154.5 mm) on this Servo Motors with Brake line?","answer":"The body length is 154.5 mm, with a 55 mm flange, 1.5 kg product weight, and an international standard flange mount pattern (5.5 mm mounting holes, 40 mm centring collar 2 mm deep) — the mechanical envelope that defines panel-side space claim."},{"question":"What is SH30552P1AA4000's listed inertia on this Servo Motors with Brake line?","answer":"Rotor inertia is 0.096 kg.cm²; the holding-brake inertia figure on the line is 0 kg.cm² because this build is supplied without a holding brake. Total reflected inertia at the shaft is therefore the rotor figure alone, which simplifies the drive's auto-tuning gain calculation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P1AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P1AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}