{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P1AA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P1AA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P1AA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P1AA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH30552P1AA4100 servo motor, 55 mm flange, 530 W continuous, 0.63–0.75 N·m nominal torque, Hiperface DSL absolute single-turn encoder, IP65.","salesMarkdown":"## Reading the SH30552P1AA4100 envelope The SH30552P1AA4100 sits in the Schneider SH3 servo family on a 55 mm flange with an international standard flange mounting pattern and a 40 mm centring collar, which is what fixes its machine-side footprint; the sizing reference SH30552P1AA4100 and the short name SH3 are the two identifiers you will see on the nameplate and the drive-side device list. Across the supported supply rails the published envelope is 0.75 N·m at 230 V single phase and 0.63 N·m at 400 V or 480 V three phase, with 280 W continuous on the single-phase rail and 530 W continuous on the three-phase rails — the 230 V single-phase figure is the derated case, not the headline, so a drive sizing done against the three-phase 530 W number does not transfer to a single-phase machine without re-checking thermal headroom. Peak stall torque is 2.5 N·m across 115…480 V three phase, so the motor can pull the same transient load on a 230 V three-phase drive as on a 480 V one; this is the figure that sizes the acceleration window for indexing axes, not the nominal torque above. ## Electrical constants the drive has to match The motor is wound for three phases with a back-EMF constant of 40 V/krpm at 20 °C and a torque constant of 0.59 N·m/A at 120 °C copper temperature — pair that against the 4.8 A Irms / 4.8 A 3-second peak and the continuous stall current of 1.2 A, and the drive's current limit must clear the 4.8 A peak with margin rather than match the 1.2 A nominal. Stator resistance of 17.4 Ohm and stator inductance of 18.2 mH are the values the drive's auto-tuning routine needs in order to set the current loop bandwidth correctly; the 3-pole construction sets the electrical cycle rate the drive has to commutate at the listed speeds. Maximum mechanical speed is 9000 rpm, so although the published nominal speed envelope is 4000 rpm at 230 V single phase, 8000 rpm at 400 V three phase and 9000 rpm at 480 V three phase, the drive must not command beyond 9000 rpm under any field-weakening profile. ## Shaft, load and sealing for the machine builder The output shaft is 9 mm diameter with a 20 mm length and a parallel key of 3 mm width, so any coupling, pulley or pinion has to be bored and keyed to that geometry; the radial load ceiling is 190 N at 8000 rpm and the axial load ceiling is 40 N, which is the limit that decides whether a helical-bevel gearbox or a belt drive can be direct-coupled or needs a separate bearing housing. Sealing is IP65 on both the motor body and the shaft bushing per IEC 60034-5, which is sufficient for washdown areas and outdoor enclosures but not for prolonged submerged duty — the centring collar depth of 2 mm and 5.5 mm mounting holes fix the panel-face geometry on the driven machine.","metaTitle":"Schneider Electric SH30552P1AA4100 SH3 servo, 530 W, IP65","metaDescription":"Schneider Electric SH30552P1AA4100 SH3 servo motor, 55 mm flange, 530 W continuous, Hiperface DSL, IP65, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P1AA4100","Length":"154.5 mm","Inertia":"0.0 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.096 kg.cm²","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.5 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/da7ff6a4e5338d5dc852911d988ea15c.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P1AA4100/sh3-servomotor-55mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"What is SH30552P1AA4100's length on this Servo Motors with Brake line?","answer":"The listed length for SH30552P1AA4100 is 154.5 mm, which is the face-to-end-of-shaft dimension that drives the cabinet depth and the machine-side envelope; product weight is 1.5 kg."},{"question":"What is SH30552P1AA4100's listed inertia on this Servo Motors with Brake line?","answer":"The rotor inertia is 0.096 kg·cm² for the motor with 0.0 kg·cm² contributed by the brake side, because the SH30552P1AA4100 ships without a holding brake fitted — this is the figure that goes into the load-inertia ratio calculation on the drive sizing sheet."},{"question":"What is the closest pin-compatible alternative to SH30552P1AA4100 in the same family?","answer":"Confirm the flange size, encoder protocol and brake option against the datasheet before specifying."},{"question":"Who supplies SH30552P1AA4100 and how is it quoted for volume purchases?","answer":"SH30552P1AA4100 is quoted to order through independent industrial-automation distribution against the BOM line quantity; lead time and volume pricing are confirmed at RFQ. Include the supply voltage (230 V single phase or 400 / 480 V three phase) and the axis duty cycle with the request so the response can match the 280 W or 530 W continuous envelope against the drive on the BOM."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P1AA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P1AA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}