{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P1AF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P1AF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P1AF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P1AF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, 55 mm flange, 530 W continuous, Hiperface DSL absolute encoder, SH30552P1AF4000.","salesMarkdown":"## 0.75 N·m nominal, 2.5 N·m peak — the working envelope The Schneider SH30552P1AF4000 is a 55 mm flange servo in the SH3 family, carrying 0.75 N·m nominal torque at 230 V single-phase and 0.63 N·m on 400 V or 480 V three-phase, with peak stall torque of 2.5 N·m across the 115–480 V range — roughly 3.3× the nominal, which is the headroom sizing engineers budget for acceleration and deceleration steps in a pick-and-place or indexing cycle. Nominal speed climbs with the supply rail: 4000 rpm at 230 V single-phase, 8000 rpm at 400 V, and 9000 rpm at 480 V. ## Mechanical fit — 55 mm flange, parallel key, IP65 motor body The motor mounts on an international-standard 55 mm flange with a 40 mm centring collar and four 5.5 mm mounting holes, and the shaft is 9 mm diameter × 20 mm long with a 3 mm parallel key — the same key/shaft geometry the SH3 family uses across this frame size, so gearbox and coupling selection stays inside one catalogue section. The body carries IP65 on the motor housing with IP54 at the shaft bushing when no shaft seal ring is fitted (per IEC 60034-5), which keeps the winding safe from coolant splash and washdown but does not make the front shaft a fully sealed through-bore — a seal ring is the usual upgrade for wet end-of-arm or food-grade cells. ## Encoder, brake and the wiring side Feedback is an absolute single-turn Hiperface DSL encoder, and the power/brake signal rides through a quick-lock rotatable right-angle connector — the rotatable head matters in a crowded cabinet because it lets the cable exit in any of four directions without forcing a dedicated harness build. The integrated holding brake delivers 0.8 N·m of static torque at 10 W pull-in power, sized to hold the rotor (and its load) at standstill without overheating the coil during a long pause. ## Sourcing reality Quoted to order against the BOM line through independent distribution — confirm flange, brake option and encoder protocol against the BOM cell before committing, since the SH30552P1AF4000 suffix ties out the brake, encoder and connector geometry for this specific build.","metaTitle":"Schneider SH30552P1AF4000 SH3 Servo Motor, 530 W, Brake","metaDescription":"Schneider SH30552P1AF4000 SH3 servo motor, 530 W, 55 mm flange, Hiperface DSL encoder, with brake. Current production; quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P1AF4000","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/777c2016c33da2a9b01cc72ae2320c9c.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P1AF4000/sh3-servomotor-55mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What is SH30552P1AF4000's listed inertia on this Servo Motors with Brake line?","answer":"Total rotor inertia is 0.117 kg·cm², broken down as 0.096 kg·cm² for the motor and 0.021 kg·cm² for the brake stack. The drive's autotuner reads the total back as a single figure, but the split matters when you compare it against a non-brake variant in the same frame."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P1AF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P1AF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}