{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P1AF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P1AF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P1AF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P1AF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, 55 mm flange, 530 W continuous, 0.75 N.m nominal, Hiperface DSL encoder, SH30552P1AF4100.","salesMarkdown":"## 55 mm flange, 181 mm body — what the package gives you The Schneider Electric SH30552P1AF4100 is a 55 mm flange servo motor with integrated holding brake, from the SH3 short-name family, carrying an absolute single-turn Hiperface DSL encoder on the rear end and terminating in a rotatable right-angle quicklock connector. Mounting is the international standard flange with 5.5 mm holes and a 40 mm centring collar 2 mm deep, so it drops into the standard Lexium servo mounting pattern without an adapter plate. ## 0.75 N.m nominal, 530 W continuous across the voltage classes Continuous power is 530 W and nominal torque is 0.75 N.m at 230 V single phase, falling to 0.63 N.m on 400 V and 480 V three phase — the higher mains voltages give more speed headroom (8000 rpm at 400 V, 9000 rpm at 480 V) but the per-amp torque constant stays at 0.59 N.m/A at 120 °C, so the drive's current loop scaling is set once and reused. Peak stall torque is 2.5 N.m across the 115–480 V range, with maximum Irms of 4.8 A and a 3 s peak output current of 4.8 A — enough short-term margin for acceleration and reversals without oversizing the drive, while continuous stall torque settles at 0.71 N.m and continuous stall current at 1.2 A for the thermal envelope. Back EMF is 40 V/krpm at 20 °C and stator winding is 17.4 Ohm with 18.2 mH inductance — the inductance tells the integrator what current-loop bandwidth to expect at a given DC-bus voltage and helps size the output filter on the drive side. ## Holding brake, shaft, and the loads it absorbs The integrated holding brake delivers 0.8 N.m at 10 W pull-in power, sized to hold the rotor — not to stop a moving load — so the safety stop function still has to come from the drive's brake control output, not from relying on the brake to absorb kinetic energy. Shaft is 9 mm diameter with a 20 mm length and parallel key (3 mm key width), so the coupling and pulley selection follow standard small-frame servo practice; maximum radial load is 190 N at 8000 rpm and maximum axial load is 40 N, which is the envelope a belt drive or small pinion must stay inside to avoid premature bearing wear. Cooling is natural convection with a 130 °C copper-hot limit, so the motor is sized for the mount it sits in — a steel plate behind the flange or a heat-sunk housing will pull more continuous torque out of it than an exposed standoff in still air.","metaTitle":"SH30552P1AF4100 Schneider Servo Motor, 530 W, with brake","metaDescription":"Schneider Electric SH30552P1AF4100 SH3 servo motor, 55 mm flange, 530 W continuous, 0.75 N.m nominal, with holding brake and Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P1AF4100","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/628f8797b14a711ae362dea353ce7a88.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P1AF4100/sh3-servomotor-55mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"What is SH30552P1AF4100's listed length on the Servo Motors with Brake line?","answer":"The body length listed for SH30552P1AF4100 is 181 mm, on a 55 mm flange with a net weight of 1.65 kg — a compact footprint for the 530 W continuous rating it carries."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P1AF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P1AF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}