{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P1BF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P1BF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30552P1BF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P1BF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30552P1BF4000 SH3 series servo motor with brake, 0.75 N.m nominal torque, 4000 rpm at 230 V single phase, 55 mm flange, IP65.","salesMarkdown":"## Mechanical envelope and how it lands in the cabinet The SH30552P1BF4000: It carries an IP65 rating on the motor body and IP54 on the shaft bushing when no shaft seal ring is fitted (per IEC 60034-5), which is fine for cabinet-mounted machine tools but not for direct washdown duty. ## Torque, speed, and where the three supply rails actually sit Nominal speed depends on which rail feeds the drive: 4000 rpm at 230 V single phase, 8000 rpm at 400 V three phase, and 9000 rpm at 480 V three phase. Nominal torque follows the same split — 0.75 N.m at 230 V single phase, dropping to 0.63 N.m at both 400 V and 480 V three phase — and continuous output power tracks 280 W on single phase, 530 W on either three-phase rail. Peak stall torque reaches 2.5 N.m across the 115 to 480 V three-phase range and continuous stall torque sits at 0.71 N.m over the same envelope, giving roughly 3× peak-over-continuous headroom for acceleration transients. The torque constant is 0.59 N.m/A at 120 °C winding with a back-EMF constant of 40 V/krpm at 20 °C, so the loop gain stays predictable across the 50 °C temperature band an axis actually sees between cold start and steady-state cut. ## Feedback and the brake that holds position when the drive stops The encoder is an absolute multiturn Hiperface DSL — single-cable feedback that runs over the power connector and keeps commissioning from needing a separate resolution wire back to the drive. ## Electrical constants, thermal behaviour, and shaft loading Stator resistance is 17.4 Ohm with 18.2 mH inductance, continuous stall current 1.2 A, and the 3-second peak current ceiling at 4.8 A matches the maximum Irms — useful when sizing the drive's current limit and the regen resistor duty. Cooling is natural convection with a 130 °C winding hot-spot limit, so no external fan or blower is needed for the rated continuous duty. The shaft takes up to 40 N axial and 190 N radial force at 8000 rpm — the radial figure is the binding constraint for belt drives and pinion-mounting geometry, not the bearing rating alone. ## Production status and how to pull one into the BOM Schneider Electric lists the SH30552P1BF4000 as current production in the SH3 family, sized under the SH30552P reference, so it sits in the standard catalogue rather than a last-time-buy window. It is quoted to order through independent distribution against an RFQ: pricing and availability come back at quote time against the BOM quantity, not off a shelf listing.","metaTitle":"Schneider SH30552P1BF4000 servo motor with brake, 530 W","metaDescription":"Schneider Electric SH30552P1BF4000 servo motor with brake, 0.75 N.m nominal, 4000 rpm, Hiperface DSL encoder. Specs and RFQ for active stock.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P1BF4000","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M17, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"190 N at 8000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/74accf77f87c779047b70be1c46212ee.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P1BF4000/sh3-servomotor-55mm-2-stacks-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m17-ip54-65/"},"ai":{"faq":[{"question":"What feedback does the SH30552P1BF4000 carry and how is it wired?","answer":"Absolute multiturn Hiperface DSL over a rotatable right-angle quicklock connector — the encoder rides on the power cable, so no separate feedback wire runs back to the drive."},{"question":"What torque and speed does the motor deliver on each supply rail?","answer":"0.75 N.m nominal at 4000 rpm on 230 V single phase, then 0.63 N.m at 8000 rpm (400 V) and 9000 rpm (480 V), with peak stall torque of 2.5 N.m across the three-phase envelope."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P1BF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P1BF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}