{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30552P1BF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30552P1BF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30552P1BF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30552P1BF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, 0.75 N.m nominal torque, 530 W continuous power, 4000 rpm nominal at 230 V single phase, 9 mm parallel-key shaft, Absolute multiturn Hiperface DSL encoder, IP65, 55 mm flange.","salesMarkdown":"## Drop-in modern guts into an old servo bay? The Schneider Electric SH30552P1BF4100 sits in the SH3 family at a 55 mm flange with a 181 mm body length and a 9 mm parallel-key shaft, so it meets the standard mounting envelope you would expect from a compact AC servo with an integrated holding brake. The centring collar is 40 mm diameter by 2 mm deep with 5.5 mm mounting holes — a footprint that lines up with the international standard flange pattern common on retrofit panels. ## What the torque/speed envelope actually means Nominal torque varies with the supply you drive it from: 0.75 N.m at 230 V single phase, 0.63 N.m at 400 V three phase, and 0.63 N.m at 480 V three phase. Continuous output power follows the same pattern — 280 W at 230 V single phase versus 530 W at both 400 V and 480 V three phase. In other words, the same frame delivers nearly twice the continuous mechanical power when fed from a three-phase bus than from a single-phase 230 V supply, so the panel's mains configuration is part of the sizing decision, not just a wiring detail. Peak stall torque is 2.5 N.m across the 115…480 V three-phase range, against a continuous stall torque of 0.71 N.m — roughly a 3.5× short-term headroom for acceleration and shock loads. The motor's torque constant is 0.59 N.m/A at 120 °C winding temperature, with a 1.2 A continuous stall current and a 4.8 A Irms/3-second peak. That current ceiling is the figure to hand to the drive sizing step, not the headline power number. Nominal speed shifts with supply too: 4000 rpm at 230 V single phase, 8000 rpm at 400 V three phase, and 9000 rpm at 480 V three phase. The stator reads 17.4 Ohm phase resistance with 18.2 mH inductance and a 40 V/krpm back-EMF constant at 20 °C, with copper-hot limit rated at 130 °C. Three motor poles and natural-convection cooling — no integrated fan — mean the thermal margin comes from how the panel builder mounts it, not from forced airflow. ## Feedback, sealing, and the shaft-side reality The feedback is an Absolute multiturn Hiperface DSL encoder — the single-cable digital protocol that pairs with the modern Lexium drive family. For a retrofit where the old resolver cable would otherwise force a re-pull, that single-cable feedback is the migration lever: the motor side uses a quicklock rotatable right-angled connector, so the cable exit angle can be set after the motor is bolted in. ## Lifecycle status and how to put it on a BOM Lifecycle stage is recorded as current production. No official LTB notice or PCN-EOL cross-reference sits on file for this order code, and there is no listed successor in the same footprint — sourcing reality is the standard quoted-to-order channel for active Schneider Electric servo stock, with availability and pricing confirmed against the BOM quantity at RFQ.","metaTitle":"Schneider SH30552P1BF4100 Servo Motor with Brake, 530 W","metaDescription":"Schneider Electric SH30552P1BF4100 servo motor with brake: 530 W continuous, 0.75 N.m nominal torque at 230 V single phase, Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30552P1BF4100","Length":"181 mm","Inertia":"0.021 kg.cm² of brake 0.096 kg.cm² of motor","Key width":"3 mm","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 2 stacks, keyed Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"20 mm","Holding brake":"With","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.117 kg.cm²","Holding torque":"0.8 N.m","Nominal torque":"0.75 N.m at 230 V single phase 0.63 N.m at 400 V three phase 0.63 N.m at 480 V three phase","Product weight":"1.65 kg","Shaft diameter":"9 mm","Torque constant":"0.59 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"530 W","Mounting support":"International standard flange","Sizing reference":"SH30552P","Back emf constant":"40 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"2.5 N.m at 115...480 V three phase","Stator inductance":"18.2 mH","Stator resistance":"17.4 Ohm","Brake pull-in power":"10 W","Maximum current Irms":"4.8 A","Nominal output power":"280 W at 230 V single phase 530 W at 400 V three phase 530 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"4.8 A","Temperature copper hot":"130 °C","Continuous stall torque":"0.71 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.2 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d11ed83209c84b38035972c1f2b1c100.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30552P1BF4100/sh3-servomotor-55mm-2-stacks-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"Where can I buy SH30552P1BF4100 and how do I get a price?","answer":"SH30552P1BF4100 is an active-production Schneider Electric servo motor with brake, sourced through independent distribution against an RFQ."},{"question":"What compliance documentation does Schneider Electric provide for SH30552P1BF4100?","answer":"The IP65 sealing on both the motor body and the shaft bushing is stated to IEC 60034-5. Beyond that, the public spec record on this order code does not enumerate RoHS, REACH, UL or additional IEC certifications — those documents are normally supplied with the shipment or on request through the manufacturer's compliance portal and are not present in the technical ledger."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30552P1BF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30552P1BF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}