{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P01A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P01A1100","canonicalUrl":"https://aoctrl.com/schneider/SH30553P01A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P01A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30553P01A1100, 680 W continuous power, 3-phase, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft, without brake.","salesMarkdown":"## Speed-torque profile across supply voltages The SH30553P01A1100: This SH3 frame motor delivers nominal speed that depends on the supply: 2000 rpm at 115 V single-phase, 4000 rpm at 230 V single-phase, and 6000 rpm at 400 V or 480 V three-phase. Nominal torque also shifts with voltage — 1.13 N·m at 115 V single-phase, 1.1 N·m at 230 V single-phase, and 0.81 N·m at 400 V or 480 V three-phase. The continuous power rating is 680 W, and peak stall torque reaches 3.5 N·m across the 115–480 V three-phase range. ## Feedback and environmental sealing The encoder is an absolute single-turn SinCos Hiperface type — this gives position feedback on power-up without a homing move, and the SinCos analog track provides fine interpolation for velocity ripple control. No holding brake on this variant, so the load must be held externally or by the drive's holding torque at standstill. IP65 rating per IEC 60034-5 on both the motor body and the shaft bushing means it handles washdown in food or beverage lines without needing a secondary cover. Natural convection cooling — no fan, so ambient temperature and duty cycle govern the thermal budget. ## Mounting and mechanical interface International standard flange, 55 mm flange size, with four mounting holes on a 5.5 mm diameter pattern and a 40 mm centring collar at 2 mm depth. The shaft is 9 mm diameter, 20 mm long, smooth (no keyway) — coupling selection must account for the smooth bore grip. Overall length is 176.5 mm. Maximum radial force at the shaft nose is 190 N at 8000 rpm, rising to 390 N at 1000 rpm — bearing life calculations should use the force at the operating speed, not the static maximum. Maximum axial force is 40 N. ## Electrical parameters for drive tuning Stator resistance is 10.4 Ω and stator inductance is 37.98 mH — these set the electrical time constant and influence the current regulator gains in the servo drive. Torque constant is 0.62 N·m/A at 120 °C copper temperature; back EMF constant is 41 V/krpm at 20 °C. Continuous stall current is 1.7 A, with a maximum RMS current of 6.5 A.","metaTitle":"Schneider Electric SH30553P01A1100 Servo Motor, 680 W","metaDescription":"Schneider Electric SH30553P01A1100 SH3 servo motor, 680 W continuous, 3-phase, IP65, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.9 in (176.5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.134 kg.cm²","Nominal torque":"10.001 lbf.in (1.13 N.m) 115 V single phase 9.7 lbf.in (1.1 N.m) 230 V single phase 7.17 lbf.in (0.81 N.m) 400 V three phase 7.17 lbf.in (0.81 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting Support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"37.98 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 970 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"40 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"9.29 lbf.in (1.05 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N 8000 rpm 390 N 1000 rpm 310 N 2000 rpm 270 N 3000 rpm 240 N 4000 rpm 230 N 5000 rpm 210 N 6000 rpm 200 N 7000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/45d79f08ad35129c1dfd17acdafca8f4.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30553P01A1100/sh3-servomotor-55mm-3-stacks-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30553P01A1100/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P01A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P01A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}