{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH30553P01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series, SH30553P01A1200 servo motor, three phase, 680 W continuous power, 2000-6000 rpm, 1.13 Nm nominal torque, absolute single-turn SinCos Hiperface encoder, smooth shaft, IP65/IP67, natural convection cooling.","salesMarkdown":"## Speed and torque across supply voltages The SH30553P01A1200: This SH3 frame servo motor delivers 680 W continuous power, but the speed and torque curves shift depending on what supply you feed it. On three-phase 400 V or 480 V it spins to 6000 rpm; on single-phase 115 V it tops out at 2000 rpm, and at 230 V single-phase it reaches 4000 rpm. Nominal torque follows the same pattern: 1.13 Nm at 115 V single-phase, 1.1 Nm at 230 V single-phase, and 0.81 Nm on both 400 V and 480 V three-phase supplies. The peak stall torque is 3.5 Nm across the 115-480 V three-phase range, so there's headroom for acceleration spikes. ## Encoder feedback and mounting constraints The absolute single-turn SinCos Hiperface encoder gives position feedback on power-up without a homing sequence, which saves a cycle on multi-axis machines. The smooth shaft (9 mm diameter, 20 mm length) means you need a clamping coupling — no keyway to transmit torque. Mounting is via an international standard flange with a 55 mm square pattern, four 5.5 mm holes, and a 40 mm pilot diameter. The centring collar depth is 2 mm, so the motor registers into the mating face before the bolts tighten. Natural convection cooling means no fan noise or filter maintenance, but the thermal budget depends on the enclosure's airflow. ## Sealing and environmental rating IP65 on the motor body and shaft bushing, IP67 on the housing — both per IEC 60034-5. That means the motor withstands hose-down cleaning and temporary immersion at the shaft seal. The straight electrical connector (not angled) simplifies cable routing in tight cabinets but needs clearance for the mating plug's bend radius.","metaTitle":"Schneider Electric SH30553P01A1200 Servo Motor, 680 W","metaDescription":"Schneider Electric SH30553P01A1200 SH3 servo motor, 680 W continuous, 2000-6000 rpm, 1.13 Nm torque, IP65/IP67, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.9 in (176.5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.134 kg.cm²","Nominal torque":"10.001 lbf.in (1.13 N.m) 115 V single phase 9.7 lbf.in (1.1 N.m) 230 V single phase 7.17 lbf.in (0.81 N.m) 400 V three phase 7.17 lbf.in (0.81 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting Support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"37.98 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 970 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"40 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"9.29 lbf.in (1.05 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N 8000 rpm 390 N 1000 rpm 310 N 2000 rpm 270 N 3000 rpm 240 N 4000 rpm 230 N 5000 rpm 210 N 6000 rpm 200 N 7000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/38f83c18c2aadd581a45878054772a68.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30553P01A1200/sh3-servomotor-55mm-3-stacks-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30553P01A1200/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH30553P01A1200?","answer":"The motor carries IP65/IP67 per IEC 60034-5. Standard Schneider documentation includes the product data sheet, installation manual, and EU Declaration of Conformity covering the Low Voltage and EMC directives. RoHS and REACH declarations are available on request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}