{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30553P02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30553P02A2100, 680 W continuous power, 6000 rpm at 400 V three-phase, 3.5 Nm peak stall torque, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, 55 mm flange.","salesMarkdown":"## Three-phase winding, supply-dependent speed and torque The SH30553P02A2100: This SH3 servo motor is wound for three-phase supply — the nominal speed and torque both shift with the input voltage. At 400 V three-phase it delivers 6000 rpm and 0.81 Nm continuous; at 115 V single-phase the same motor runs at 2000 rpm with 1.13 Nm. The drive must be configured for the actual supply voltage to get the rated performance. Continuous power is 680 W regardless of supply — that's the thermal limit the motor can sustain indefinitely. Peak stall torque reaches 3.5 Nm for short-duration acceleration or breakaway, but the continuous stall torque is 1.05 Nm at 1.7 A. ## Feedback and mounting — what the drive needs to see The encoder is an absolute multiturn SinCos Hiperface type — the drive must support Hiperface protocol to read position and commutation data. Not all servo drives accept this feedback; check the drive's encoder input compatibility before pairing. The motor has a smooth shaft (no keyway) with a 9 mm diameter and 20 mm shaft length. The flange is 55 mm square with a 40 mm centring collar and 2 mm collar depth — standard international flange dimensions that match most common mounting brackets. ## Environmental sealing and cooling IP65 rating on both the motor body and the shaft bushing means the motor is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for washdown areas in food processing, packaging, or machining environments where coolant spray is present. Cooling is by natural convection — no external fan or forced air required. The motor relies on its own surface area and the mounting flange to dissipate heat. In a confined enclosure or high-ambient-temperature setting, the continuous torque may need derating. ## Active production — sourcing for new builds and spares The electrical connection uses a rotatable right-angled connector, which allows the cable exit direction to be oriented after installation — useful when routing in tight cable trays or drag chains.","metaTitle":"Schneider Electric SH30553P02A2100 Servo Motor, 680 W","metaDescription":"Schneider Electric SH30553P02A2100 SH3 servo motor, 680 W continuous, 6000 rpm at 400 V three-phase, IP65, absolute multiturn Hiperface encoder, smooth shaft.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30553P02A2100","Length":"6.9 in (176.5 mm)","Inertia":"0.0 kg.cm² of brake 0.134 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.134 kg.cm²","Nominal torque":"10.001 lbf.in (1.13 N.m) 115 V single phase 9.7 lbf.in (1.1 N.m) 230 V single phase 7.17 lbf.in (0.81 N.m) 400 V three phase 7.17 lbf.in (0.81 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting Support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"13.02 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 970 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"6.5 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"9.29 lbf.in (1.05 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N 8000 rpm 390 N 1000 rpm 310 N 2000 rpm 270 N 3000 rpm 240 N 4000 rpm 230 N 5000 rpm 210 N 6000 rpm 200 N 7000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/66e073bf7063743fdc7b5a17f4a4d58d.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30553P02A2100/sh3-servomotor-55mm-3-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What encoder type does SH30553P02A2100 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. The drive must support Hiperface protocol to read position and commutation data from this motor."},{"question":"Does SH30553P02A2100 have a holding brake?","answer":"No, this variant is supplied without a holding brake. If the application requires the motor to hold the load at standstill when power is removed, a separate brake or a braked motor version must be selected."},{"question":"What is the IP rating of SH30553P02A2100?","answer":"IP65 on both the motor body and the shaft bushing, per IEC 60034-5. This means it is dust-tight and protected against low-pressure water jets — suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}