{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30553P02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P02F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, 55 mm flange, three phase, smooth shaft, absolute multiturn SinCos Hiperface encoder, 680 W continuous power, IP54/IP65.","salesMarkdown":"## What this motor is built for The SH30553P02F1000 is a 55 mm flange servo motor from Schneider Electric's SH3 series, designed for precise motion control in applications that need a holding brake. It carries a smooth shaft and an absolute multiturn SinCos Hiperface encoder, so the drive knows the exact position on power-up — no homing cycle needed after a power loss or emergency stop. The holding brake delivers 0.8 N.m of holding torque, enough to keep a vertical axis from dropping when the drive is disabled. Three-phase supply, but the torque you get depends on the line voltage: 1.13 N.m at 115 V single phase, 1.1 N.m at 230 V single phase, and 0.81 N.m at 400 V or 480 V three phase. The continuous power rating is 680 W, and the nominal speed range runs from 2000 rpm at 115 V up to 8000 rpm at 400 V or 480 V three phase. ## Encoder and feedback — what the Hiperface means The absolute multiturn SinCos Hiperface encoder is the key differentiator here. Unlike an incremental encoder that loses position when power cycles, this one keeps track of the shaft angle across multiple revolutions. That means on a pick-and-place gantry or a rotary table, the controller knows exactly where the load is the instant the drive enables — no reference run, no lost production time after a fault. The SinCos analog track gives high-resolution position feedback for smooth low-speed control, and the Hiperface protocol is a common standard across Schneider's Lexium drives. If you're pairing this motor with a Lexium 28 or 32 drive, the feedback wiring is straightforward — just match the pinout in the drive manual. ## Mounting and environmental fit The motor mounts on an international standard 55 mm flange (2.2 in) with a centring collar diameter of 40 mm and a 2 mm collar depth. Four mounting holes at 5.5 mm diameter — standard bolt pattern for this frame size. IP54 with the shaft bushing without seal ring; IP65 with the seal ring fitted. That means it handles dust and splash in a typical machine environment, but if you're in a washdown zone, you'll want the seal ring option. Cooling is natural convection — no fan, so keep the ambient airflow in mind if you're running near the torque limit continuously. ## Sourcing and lifecycle — active and available We source SH30553P02F1000 through authorized distribution channels. No minimum order quantity beyond what the line allows — single-unit spares or production volumes, both quoted the same way.","metaTitle":"Schneider Electric SH30553P02F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30553P02F1000 servo motor with brake, 55 mm flange, absolute multiturn Hiperface encoder, 680 W continuous power.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.0 in (203 mm)","Inertia":"0.021 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"With","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 8000 rpm 400 V three phase 8000 rpm 480 V three phase","Rotor inertia":"0.155 kg.cm²","Holding torque":"7.08 lbf.in (0.8 N.m)","Nominal torque":"10.001 lbf.in (1.13 N.m) 115 V single phase 9.7 lbf.in (1.1 N.m) 230 V single phase 7.17 lbf.in (0.81 N.m) 400 V three phase 7.17 lbf.in (0.81 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting Support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"37.98 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 970 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"6.5 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"9.29 lbf.in (1.05 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N 8000 rpm 390 N 1000 rpm 310 N 2000 rpm 270 N 3000 rpm 240 N 4000 rpm 230 N 5000 rpm 210 N 6000 rpm 200 N 7000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3dbc5af2cacff977e82e2073d0458ecc.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30553P02F1000/sh3-servomotor-55mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30553P02F1000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH30553P02F1000 and how do I get a price?","answer":"We source SH30553P02F1000 through authorized distribution. Submit an RFQ with your quantity and target delivery window — we confirm availability and current pricing at quote time."},{"question":"What is the encoder type on SH30553P02F1000?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This gives position feedback across multiple revolutions without needing a homing cycle after power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}