{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P0AA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P0AA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30553P0AA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P0AA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30553P0AA4100, 55 mm flange, 680 W continuous, Hiperface DSL encoder, IP65, natural convection, smooth shaft 9 mm.","salesMarkdown":"## 55 mm flange, 680 W continuous — what this SH3 frame actually delivers The Schneider Electric SH30553P0AA4100 is an SH3-series three-phase servo motor (Device short name SH3, Sizing reference SH30553P) with a 55 mm flange and international standard mounting, dropping into a typical small-frame servo pocket on a packaging line, indexing table, or pick-and-place axis where the existing machine footprint already calls for an SH30553 family drop-in. Continuous output runs 680 W with a 1.05 N.m continuous stall torque from 1.7 A; peak stall torque reaches 3.5 N.m at 6.5 A Irms (3-second peak), so the drive sizing budget should be set against the peak, not the continuous figure. ## Three supply windows on one nameplate — speed and torque vs. bus voltage Nominal speed is 4000 rpm on 230 V single-phase, 8000 rpm on 400 V three-phase, and 9000 rpm on 480 V three-phase, with nominal torque of 1.1 N.m (230 V single-phase) or 0.81 N.m (400 V / 480 V three-phase) and nominal output power of 390 W single-phase versus 680 W on either three-phase bus — the three-phase connection is what unlocks the full 680 W continuous rating. Mechanical ceiling is 9000 rpm; torque constant is 0.62 N.m/A at 120 °C winding temperature, and back-EMF is 41 V/krpm at 20 °C, so the drive current loop must be tuned against the 0.62 N.m/A figure at the operating winding temperature, not at cold start. ## Hiperface DSL feedback and the rotatable connector Feedback is an absolute single-turn Hiperface DSL encoder — the single-cable DSL link carries power and position data on one pair, so the cabinet side needs a DSL-capable drive (Lexium 32 / Lexium 28S-class) and the existing SH30553-family harness lands without a separate encoder cable run. The electrical connection is a quicklock rotatable right-angled connector, which means the cable exit can be clocked to four positions before the lock is engaged — useful when the motor is mounted at an angle in a tight axis envelope and the harness has to follow the cable tray rather than the motor face. ## Shaft, thrust loads, and the IP65 envelope IP65 protection applies to both the motor body and the shaft bushing per IEC 60034-5, which clears washdown and food-adjacent packaging environments as long as the cable gland and connector face are sealed to the same standard; cooling is natural convection, so derating kicks in above the 130 °C winding hot-spot limit if the motor is enclosed in a heat-soaked cabinet.","metaTitle":"SH30553P0AA4100 Schneider SH3 Servo Motor, 680 W","metaDescription":"Schneider SH30553P0AA4100 SH3 servo motor, 55 mm flange, 680 W continuous, 0.62 N.m/A, Hiperface DSL, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30553P0AA4100","Length":"176.5 mm","Inertia":"0.0 kg.cm² of brake 0.134 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 3 stacks, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.134 kg.cm²","Nominal torque":"1.1 N.m at 230 V single phase 0.81 N.m at 400 V three phase 0.81 N.m at 480 V three phase","Product weight":"1.8 kg","Shaft diameter":"9 mm","Torque constant":"0.62 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"3.5 N.m at 115...480 V three phase","Stator inductance":"13.02 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"390 W at 230 V single phase 680 W at 400 V three phase 680 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"6.5 A","Temperature copper hot":"130 °C","Continuous stall torque":"1.05 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/400bfdab64ba4c2ac6f578abf6cdb7fa.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30553P0AA4100/sh3-servomotor-55mm-3-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"Who supplies the SH30553P0AA4100 and how is it quoted for volume purchases?","answer":"Lead time and volume breaks are settled against the order rather than from a published price ladder."},{"question":"What is the SH30553P0AA4100's listed length and inertia?","answer":"Body length is 176.5 mm and rotor inertia is 0.134 kg.cm² (motor only; no brake on this code), which sets the reflected inertia budget when sizing the coupling to the driven load."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P0AA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P0AA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}