{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P0BA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P0BA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30553P0BA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P0BA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, 55 mm flange, 680 W continuous, 4000–9000 rpm, Hiperface DSL encoder, IP65, order code SH30553P0BA4100.","salesMarkdown":"## What the SH3 designation buys you SH30553P0BA4100 is the SH3 servo-motor size 55 mm flange unit in the current Schneider Electric lineup, sized at 680 W continuous with the smooth 9 mm shaft and a Hiperface DSL absolute multiturn encoder. It carries IP65 on both motor body and shaft bushing per IEC 60034-5, which means it tolerates panel-side splash and dust in a typical machine-room environment — though the catalogue line labels it as a brake-spec motor, the entry here is the Without-holding-brake variant, so the brake interface is not wired. The encoder choice is the load-bearing selection: Hiperface DSL runs the feedback over a single cable pair, which simplifies commissioning compared to a multi-conductor resolver harness — though the drive on the other end must accept DSL or the feedback channel has to land through a protocol gateway. ## Speed, torque and current envelope Nominal speed depends on the supply it sees: 4000 rpm on single-phase 230 V, 8000 rpm on three-phase 400 V, and 9000 rpm on three-phase 480 V — maximum mechanical speed is 9000 rpm, so the 480 V condition is the upper limit of the safe operating envelope. Continuous output power is 390 W on single-phase 230 V and 680 W on three-phase 400 V or 480 V; continuous stall torque is 1.05 N.m at 115...480 V three phase and peak stall torque reaches 3.5 N.m across the same range — the three-phase figure is the one the sizing calc should use, not the single-phase headline. Continuous stall current is 1.7 A and the 3-second peak output current is 6.5 A, which sets the drive's peak-current rating and acceleration-cap sizing. Nominal torque tracks the supply: 1.1 N.m at single-phase 230 V and 0.81 N.m at three-phase 400 V or 480 V; the torque constant 0.62 N.m/A at 120 °C is the figure to use in the drive's current-loop tuning, not the 25 °C value. ## Winding and thermal data for the drive's parameter set Stator resistance 10.4 Ohm and stator inductance 13.02 mH — entered into the drive's motor model, these set the current-loop bandwidth and the field-weakening boundary. Back-EMF constant 41 V/krpm at 20 °C — at 9000 rpm the regenerative bus sees roughly 370 V of back-EMF, so the drive's DC-bus rating must clear that with margin. Cooling is natural convection with a copper-hot temperature ceiling of 130 °C — derate continuous torque above 40 °C ambient per the manufacturer curve; the heatsink is the motor housing, not an external fan. ## Mounting geometry and shaft load Body length 176.5 mm on an international-standard flange with 40 mm centring collar, four 5.5 mm mounting holes and a 2 mm centring-collar depth — a standard NEMA-style 55 mm bolt circle fits without adapter plate. Shaft is 9 mm diameter × 20 mm length with a smooth (non-keyed) end; maximum radial force 710 N at 1000 rpm and maximum axial force 80 N — direct-coupled loads stay well inside the envelope, belt drives need the pulley sized against the radial-force curve. ## Sourcing posture for a current-production servo Lifecycle stage entry is current — meaning the part is on the active Schneider Electric catalogue line and is not flagged for phase-out on the available record; no official L*-level successor or cross-reference is on file here.","metaTitle":"SH30553P0BA4100 Schneider SH3 Servo Motor, 680 W","metaDescription":"Schneider Electric SH30553P0BA4100 SH3 servo motor, 55 mm flange, 680 W continuous, Hiperface DSL feedback, IP65, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30553P0BA4100","Length":"176.5 mm","Inertia":"0.0 kg.cm² of brake 0.134 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 55mm, 3 stacks, smooth Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M17, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"20 mm","Holding brake":"Without","Nominal speed":"4000 rpm at 230 V single phase 8000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.134 kg.cm²","Nominal torque":"1.1 N.m at 230 V single phase 0.81 N.m at 400 V three phase 0.81 N.m at 480 V three phase","Product weight":"1.8 kg","Shaft diameter":"9 mm","Torque constant":"0.62 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"55 mm","Peak stall torque":"3.5 N.m at 115...480 V three phase","Stator inductance":"13.02 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"390 W at 230 V single phase 680 W at 400 V three phase 680 W at 480 V three phase","Centring collar depth":"2 mm","Electrical connection":"quicklock rotatable right angled connector","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"6.5 A","Temperature copper hot":"130 °C","Continuous stall torque":"1.05 N.m at 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N at 1000 rpm","Mounting holes diameter":"5.5 mm","Centring collar diameter":"40 mm","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"63 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/08878c8fc6573095c7bd45fbc2ec485b.pdf","sourceUrl":"https://www.se.com/uk/en/product/SH30553P0BA4100/sh3-servomotor-55mm-3-stacks-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m17-ip65-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30553P0BA4100?","answer":"For line-down situations, call out the urgency on the RFQ so the quote reflects the actual channel rather than a default lead-time figure."},{"question":"What is SH30553P0BA4100's listed length on this servo line?","answer":"The body length is 176.5 mm on a 55 mm flange with a 40 mm centring collar — the standard NEMA-style 55 mm bolt-circle footprint. Match this against the cabinet cut-out before specifying; a motor on the same flange size from another family is not necessarily the same length."},{"question":"What is SH30553P0BA4100's listed inertia on this servo line?","answer":"Rotor inertia is 0.134 kg.cm², with the brake-inertia slot listed as 0.0 kg.cm² — that zero reading matches the Without-holding-brake variant. Feed the 0.134 kg.cm² motor value into the drive's inertia ratio calculation."},{"question":"What is the closest pin-compatible alternative in this servo-motor family?","answer":"No L*-level successor or pin-compatible cross-reference is on file for this order code in the available record — the sizing reference SH30553P identifies the family, but no drop-in replacement has been captured here. Confirm any alternate against the exact flange, shaft, encoder protocol and brake variant before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P0BA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P0BA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}