{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30553P12A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30553P12A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30553P12A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30553P12A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30553P12A2100, 680 W continuous power, 6000 rpm at 400/480 V three-phase, IP65, absolute multiturn SinCos Hiperface encoder, 55 mm flange, without brake.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH30553P12A2100: The motor delivers 6000 rpm nominal at both 400 V three-phase and 480 V three-phase, with a nominal torque of 7.17 lbf.in (0.81 N.m) at those voltages. On single-phase 230 V it runs at 4000 rpm with 9.7 lbf.in (1.1 N.m); on 115 V single-phase it drops to 2000 rpm and 10.001 lbf.in (1.13 N.m). Continuous power is 680 W, but nominal output power varies by supply: 240 W at 115 V single-phase, 460 W at 230 V single-phase, 880 W at 400 V three-phase, and 970 W at 480 V three-phase. The peak stall torque reaches 31.0 lbf.in (3.5 N.m) across the 115–480 V three-phase range — useful for short-duration acceleration events. Continuous stall torque is 9.29 lbf.in (1.05 N.m) at 115–480 V three-phase, so the motor holds rated torque at zero speed without overheating, assuming natural convection cooling (the specified cooling type). ## Encoder, feedback, and mechanical interface The encoder is an absolute multiturn SinCos Hiperface type — this gives position feedback on power-up without a homing cycle, which matters for applications where the axis position must be known immediately after a power loss or cycle. The electrical connection uses a rotatable right-angled connector, so the cable exit angle can be adjusted in the field to fit tight cabinet layouts. IP65 protection on both the motor body and the shaft bushing (per IEC 60034-5) means it handles washdown environments — food processing, packaging, or any line where hosing down the machine is routine. Mounting is via an international standard flange with a 55 mm flange size and a 40 mm centring collar. The shaft is 9 mm diameter, 20 mm long, with a parallel key and 3 mm key width. Maximum radial force at the shaft is 190 N at 8000 rpm, rising to 390 N at 1000 rpm — derate the overhung load if running at lower speeds. ## Electrical parameters for drive tuning Stator resistance is 10.4 Ohm and stator inductance is 13.02 mH — these are the values the servo drive needs for its current-loop tuning and for setting the field-weakening breakpoint. The torque constant is 0.62 N.m/A at 248 °F (120 °C), and the back EMF constant is 41 V/krpm at 68 °F (20 °C). Maximum RMS current is 6.5 A, and the 3-second peak output current is also 6.5 A — so the motor's thermal limit and the drive's peak current capability are matched at that figure. The motor has 3 poles.","metaTitle":"Schneider Electric SH30553P12A2100 Servo Motor, 680 W","metaDescription":"Schneider Electric SH30553P12A2100 SH3 servo motor, 680 W continuous power, 6000 rpm at 400/480 V three-phase. IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30553P12A2100","Length":"6.9 in (176.5 mm)","Inertia":"0.0 kg.cm² of brake 0.134 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.1 in (3 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 55mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.8 in (20 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 115 V single phase 4000 rpm 230 V single phase 6000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"0.134 kg.cm²","Nominal torque":"10.001 lbf.in (1.13 N.m) 115 V single phase 9.7 lbf.in (1.1 N.m) 230 V single phase 7.17 lbf.in (0.81 N.m) 400 V three phase 7.17 lbf.in (0.81 N.m) 480 V three phase","Shaft diameter":"0.4 in (9 mm)","Torque constant":"0.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"680 W","Mounting Support":"International standard flange","Sizing reference":"SH30553P","Back emf constant":"41 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.2 in (55 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"13.02 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"6.5 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 970 W 480 V three phase","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"40 N","Output current 3s peak":"6.5 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"9.29 lbf.in (1.05 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"190 N 8000 rpm 390 N 1000 rpm 310 N 2000 rpm 270 N 3000 rpm 240 N 4000 rpm 230 N 5000 rpm 210 N 6000 rpm 200 N 7000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"1.6 in (40 mm)","Continuous stall current":"1.7 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"2.5 in (63 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6131bb8cf2202c1087d198f0c048a49e.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30553P12A2100/sh3-servomotor-55mm-3-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is SH30553P12A2100's listed phase and IP rating?","answer":"It is a three-phase motor with IP65 protection on both the motor body and the shaft bushing, conforming to IEC 60034-5."},{"question":"What compliance documentation does Schneider Electric provide for SH30553P12A2100?","answer":"The motor carries IP65 certification per IEC 60034-5. Standard Schneider documentation includes a declaration of conformity for the CE mark; RoHS and REACH compliance data is available on request from the manufacturer."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30553P12A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30553P12A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}