{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P01A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P01A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P01A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P01A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30701P01A1000, 690 W continuous power, 1.4 N.m nominal torque, 8000 rpm max mechanical speed, absolute single-turn SinCos Hiperface encoder, smooth shaft, IP54/IP65.","salesMarkdown":"## 690 W continuous power, voltage-dependent speed and torque The SH30701P01A1000 is a 690 W SH3-series servo motor from Schneider Electric, rated for three-phase supply but also operable on single-phase at reduced output. On 400 V three-phase it delivers 820 W nominal output power with 9.7 lbf.in (1.1 N.m) nominal torque; on 115 V single-phase the same torque holds at 1.4 N.m but output power drops to 220 W. Speed is voltage-dependent: 1500 rpm on 115 V single-phase, 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. Maximum mechanical speed is 8000 rpm, giving headroom for applications that need brief overspeed. ## Absolute single-turn SinCos Hiperface encoder — no homing cycle Fitted with an absolute single-turn SinCos Hiperface encoder. On power-up the drive reads the absolute position within one revolution — no homing sequence needed, which cuts cycle time on machines that power-cycle between batches. The SinCos analog track also gives interpolated position for smooth low-speed ripple. The encoder pairs with Schneider's Lexium 28 or 32 drives natively; third-party drives that support Hiperface interface can also decode the signal. ## Smooth shaft, IP54/IP65, connector options Smooth shaft with 11 mm diameter and 23 mm length. No keyway means the coupling must transmit torque through friction or a clamping mechanism — confirm the coupling bore tolerance and torque capacity for the 1.4 N.m nominal and 3.5 N.m peak stall torque. IP54 with the shaft bushing and no shaft seal ring; IP65 with the seal ring fitted. The motor uses natural convection cooling — no fan, so mounting clearance for airflow matters. Electrical connection options include a rotatable right-angled connector and a straight connector, giving cable exit flexibility in tight cabinets.","metaTitle":"Schneider Electric SH30701P01A1000 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P01A1000 SH3 servo motor, 690 W continuous power, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P01A1000","Length":"6.06 in (154 mm)","Inertia":"0.0 kg.cm² of brake 0.25 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, SinCos Singleturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.25 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/33c3b3c9a78b093396f18046d49e27cb.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30701P01A1000/sh3-servomotor-70mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH30701P01A1000?","answer":"The motor carries IP degree of protection per IEC 60034-5. Standard Schneider documentation includes the product data sheet and installation manual; compliance with RoHS, REACH, and applicable CE/UKCA directives is typical for current-production SH3 motors, though specific certificates should be confirmed at order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P01A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P01A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}