{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P01A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P01A1100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P01A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P01A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P01A1100 SH3 series servo motor, 690 W continuous power, 1.4 Nm nominal torque, 8000 rpm max mechanical speed, absolute single-turn SinCos Hiperface encoder, IP65, smooth shaft, no brake.","salesMarkdown":"## Supply voltage drives the speed-torque envelope The SH30701P01A1100: This motor delivers different performance depending on the supply. On three-phase 400 V it reaches 6000 rpm nominal and 820 W output; on 480 V three-phase it hits 7200 rpm and 950 W. Single-phase 115 V or 230 V limits the nominal speed to 1500 rpm or 3000 rpm respectively, with output power dropping to 220 W or 440 W. Nominal torque holds at 1.4 N.m on single-phase supplies but drops to 1.1 N.m on three-phase 400 V and 480 V. Continuous stall torque is 1.25 N.m across the three-phase range (115–480 V), with a continuous stall current of 1.8 A. Peak stall torque reaches 3.5 N.m, drawing 5.7 A for up to 3 seconds — useful for acceleration or overcoming static friction. ## Encoder, feedback, and integration constraints The absolute single-turn SinCos Hiperface encoder gives position feedback at power-up without a homing cycle — the drive reads the absolute position directly. This saves time on multi-axis machines where each axis must re-home after a power cycle if using incremental encoders. Smooth shaft (no keyway) with 11 mm diameter and 23 mm shaft length; the coupling must be a clamping type. No holding brake — the load must be held by the drive's holding torque or an external brake. IP65 rating on the motor body and shaft bushing means it withstands washdown in food or packaging lines, but the rotatable right-angle connector must be properly seated to maintain the seal.","metaTitle":"Schneider SH30701P01A1100 Servo Motor, 690 W, 1.4 Nm","metaDescription":"Schneider Electric SH30701P01A1100 SH3 servo motor, 690 W continuous, 1.4 Nm torque, 8000 rpm max, absolute single-turn encoder, IP65, active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P01A1100","Length":"6.06 in (154 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, SinCos Singleturn 128, no Brake, straight, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.25 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"60.25 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8893eee6ed444bb140caadd1e8fb4e67.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30701P01A1100/sh3-servomotor-70mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P01A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P01A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}