{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH30701P01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30701P01A1200, 690 W continuous power, 8000 rpm max mechanical speed, absolute single-turn SinCos Hiperface encoder, IP65/IP67, smooth shaft, without brake.","salesMarkdown":"## Power and speed across supply voltages The SH30701P01A1200 delivers 690 W continuous power from a 70 mm flange frame, but its speed and torque curves shift with the supply voltage. On 400 V three-phase, nominal speed is 6000 rpm with 1.1 Nm torque; on 480 V three-phase, that climbs to 7200 rpm at the same torque. For single-phase 230 V, expect 3000 rpm and 1.4 Nm — the torque stays higher but the speed ceiling drops. Peak stall torque reaches 3.5 Nm across the 115–480 V three-phase range, enough for short acceleration bursts. Continuous stall torque sits at 1.25 Nm, so the motor can hold position at rated current indefinitely without overheating the windings. ## Encoder feedback and environmental sealing The absolute single-turn SinCos Hiperface encoder gives position feedback on power-up without a homing sequence — useful on lines where the machine must resume after a power cycle without re-referencing. The motor body and shaft bushing carry IP65, while the housing meets IP67 per IEC 60034-5, so it handles washdown in food-and-beverage or wet processing areas. No holding brake is fitted on this variant. For vertical-axis loads or applications that must hold position with power off, you will need an external brake or a different motor from the SH3 family with the brake option. ## Mechanical limits for belt and pulley loads Maximum mechanical speed is 8000 rpm — stay below this even if the drive can command higher. The radial force the bearings can handle drops with speed: 660 N at 1000 rpm, down to 360 N at 6000 rpm. If you are driving a belt or pulley, check the radial load at your operating speed against this curve to avoid premature bearing wear. Maximum axial force on the shaft is 80 N. The smooth 11 mm shaft with a 23 mm engagement length accepts a clamp-on coupling; there is no keyway, so torque transmission relies on the clamping force of the coupling hub.","metaTitle":"Schneider Electric SH30701P01A1200 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P01A1200 SH3 servo motor, 690 W continuous power, 8000 rpm max speed, IP65/IP67, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.06 in (154 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.25 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"60.25 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f10ad7452bdd41068764f7f9fbb92e8f.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30701P01A1200/sh3-servomotor-70mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P01A1200/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30701P01A1200?","answer":"Submit an RFQ through this listing."},{"question":"What is the closest alternative to SH30701P01A1200 in the SH3 family?","answer":"The SH30701P sizing reference covers this frame size. Within the SH3 series, the main variant difference is the brake option — this motor has no holding brake. A brake-equipped sibling shares the same flange, encoder, and power ratings but adds a spring-set brake for vertical-axis hold."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}