{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P02A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P02A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P02A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P02A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P02A1000 servo motor, SH3 series, 690 W continuous power, 6000 rpm at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, smooth shaft, IP54/IP65, natural convection cooling.","salesMarkdown":"## Speed and torque across supply voltages The SH30701P02A1000 delivers a nominal speed of 6000 rpm when fed from a 400 V three-phase supply, and 7200 rpm at 480 V three-phase. On single-phase 115 V or 230 V, speed drops to 1500 rpm and 3000 rpm respectively. Nominal torque is 1.4 N·m on single-phase supplies (115 V or 230 V) and 1.1 N·m on three-phase 400 V or 480 V. Peak stall torque reaches 3.5 N·m across the three-phase range. ## Encoder and feedback for position loops Fitted with an absolute multiturn SinCos Hiperface encoder — this gives the drive controller the rotor position at power-up without a homing sequence, critical for high-speed pick-and-place or rotary indexing where lost position means a crash. The back EMF constant is 46 V/krpm at 20 °C, and the torque constant is 0.69 N·m/A at 120 °C copper temperature. These numbers let the drive engineer calculate the voltage headroom and current loop gain for the target speed-torque point. ## Mounting and environmental sealing The motor uses an international standard flange with a 70 mm flange size and a 60 mm centring collar. The smooth shaft (11 mm diameter, 23 mm length) accepts a keyless coupling or collet — no keyway to align. IP54 as standard (shaft bushing without seal ring); IP65 with the optional shaft seal ring. For washdown or dusty environments, spec the seal ring — the motor body itself is IP65-rated per IEC 60034-5.","metaTitle":"Schneider Electric SH30701P02A1000 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P02A1000 servo motor, 690 W continuous power, 6000 rpm at 400 V three-phase, absolute multiturn Hiperface encoder, IP54/IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P02A1000","Length":"6.06 in (154 mm)","Inertia":"0.0 kg.cm² of brake 0.25 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.25 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e44b84f11ab0b5a34c0c1d3e5dba9d70.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30701P02A1000/sh3-servomotor-70mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH30701P02A1000?","answer":"No official pin-compatible alternative or successor is recorded for the SH30701P02A1000. The sizing reference SH30701P defines the frame and electrical interface; any replacement would require a full BOM review."},{"question":"What compliance documentation is available for SH30701P02A1000?","answer":"The motor carries IP54/IP65 ratings per IEC 60034-5. Standard Schneider Electric documentation includes the product data sheet and installation manual; RoHS and REACH declarations are available on request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P02A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P02A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}