{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P02F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P02F1000 SH3 servo motor with brake, 690 W continuous power, 3 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65, 70 mm flange.","salesMarkdown":"## Frame size and mechanical integration The SH30701P02F1000 uses a 70 mm (2.8 in) international standard flange with a 60 mm centring collar and 5.5 mm mounting holes — this is the IEC frame size that mates with the standard SH3 motor bracket. Overall length is 179.5 mm (7.07 in) with a 23 mm shaft extension, 11 mm shaft diameter, smooth shaft end — no keyway, so the coupling or pulley clamps onto the shaft directly. ## Speed-torque envelope across supply voltages Nominal speed depends on the supply: 1500 rpm at 115 V single phase, 3000 rpm at 230 V single phase, 6000 rpm at 400 V three phase, and 7200 rpm at 480 V three phase — the motor is wound for a wide voltage range but the drive must match the input configuration. Nominal torque is 1.4 N.m (12.4 lbf·in) on single-phase 115 V or 230 V, dropping to 1.1 N.m (9.7 lbf·in) on three-phase 400 V or 480 V — the torque constant is 0.69 N.m/A at 120 °C copper temperature. Continuous power output is 690 W; nominal output power varies from 220 W (115 V single phase) to 950 W (480 V three phase). Continuous stall torque is 1.25 N.m (11.06 lbf·in) on 115–480 V three phase — this is the torque the motor can hold indefinitely at standstill without overheating, limited by natural convection cooling. ## Feedback, brake, and connection The encoder is an absolute multiturn SinCos Hiperface type — this gives position feedback on power-up without a homing sequence, essential for applications that must retain position after a power cycle. Holding brake is included, rated at 3 N.m (26.6 lbf·in) holding torque — this holds the vertical axis load when power is removed, preventing the shaft from back-driving. Electrical connection options are a rotatable right-angled connector or a straight connector — both allow the cable exit to be oriented to fit tight cabinet layouts. ## Environmental and mechanical limits IP protection is IP54 at the shaft bushing without the shaft seal ring, and IP65 for the motor body and with the shaft bushing seal ring fitted — the IP65 rating means it withstands hose-down cleaning in food or washdown environments. Maximum radial force Fr is 660 N at 1000 rpm, derating to 360 N at 6000 rpm — the bearing load limit drops with speed. Maximum axial force Fa is 80 N. Copper hot temperature limit is 130 °C (266 °F) — the motor can run at this winding temperature without damage, but the torque constant and back EMF constant are specified at 120 °C and 20 °C respectively. ## Electrical parameters for drive tuning Stator resistance is 10.4 Ω and stator inductance is 60.25 mH — these feed into the drive's auto-tuning routine for current loop gains and field-weakening thresholds. Maximum continuous current Irms is 5.7 A; the 3-second peak output current is also 5.7 A — the motor's thermal limit is the same for peak and continuous, so the drive's current limit must be set at or below this value. Back EMF constant is 46 V/krpm at 20 °C — this sets the voltage the motor generates at speed; the drive's DC bus voltage must exceed this back EMF plus the voltage drop across the stator resistance to deliver current.","metaTitle":"Schneider Electric SH30701P02F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P02F1000 SH3 servo motor with brake. 690 W continuous power, 3 N.m holding torque, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.07 in (179.5 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"60.25 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1c4005b3614aae194b8bb18a65e5fc11.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30701P02F1000/sh3-servomotor-70mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P02F1000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30701P02F1000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder — this provides position and speed feedback on power-up without requiring a homing sequence, suitable for applications that need to retain axis position after a power cycle."},{"question":"What is the holding brake torque on SH30701P02F1000?","answer":"The holding brake torque is 3 N.m (26.6 lbf·in) — this holds the load when power is removed, preventing the shaft from back-driving in vertical or gravity-loaded axes."},{"question":"What IP rating does SH30701P02F1000 have?","answer":"The motor body and shaft bushing with seal ring are rated IP65 per IEC 60034-5; without the shaft seal ring the bushing is IP54. The IP65 rating allows hose-down cleaning in food or washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}